PA-2400 Hardware Manual (Version 1.00 ) March 1998 Casio Computer Co., Ltd. Copyright ©1998. All rights reserved.
Table of Contents Chapter 1. 1. 1 Chapter 2. 2. 1 2. 2 2. 3 2. 4 Chapter 3. Chapter 4. 4. 1 4. 2 4. 3 4. 4 4. 5 4. 6 4. 7 4. 8 4. 9 4.10 4.11 4.
1. Overview This manual describes the hardware specifications of the H/PC (PA-2400). It uses the Windows CE US Ver2.0 operating system. The Casio PA-2400 is the next model up from the PA-2100 (CASSIOPEIA Pen Version operating under Japanese-language OS Ver1.01) . This H/PC has been developed for overseas markets. It has pen input capability and is based on the CASSIOPEIA Key Version, which is the generic consumer model that is similar to the Japanese-language Ver1.01 model.
1.1 Features This H/PC has the Windows CE US Ver2.0 open-platform OS pre-installed. Table 1.1 Differences from Ver1.01 Item Windows CE Ver2.0 1 OS environment Network compatible * Print function added Sound and backlight controllable from OS 2 3 Font Concurrent use of multiple cards 4 Application 5 Expandable Memory 6 AP development environment Windows CE Ver1.
2. System Configuration 2.1 System Block Diagram Fig. 2.1 System Block Diagram # $ !! & + 78 1 - % - 9 #% $ !! & + 78 $ % . / 0 / / $ # - & ) $ * " !" ' " (% &)+ ) .
2.2 Available Model Table 2.1 Available Model Model DRAM PA-2400 8 MB Memory Size Mask ROM 16 MB (OS: 8 MB x 2) Remark FROM - Pen version 2.3 Options Table 2.2 List of Options Option Model PA-2110IF-E I/O Box (Master) PA-2111IF-E I/O Box (Satellite) PA-2020LI Battery pack (720 mA/H) PA-2040DCHG-E Dual recharger AC adaptor AD-C50200-U AD-C50200-G DT-825ADP-U DT-825ADP-G PC connection cable TPX1375-010100 (no.
2.4 PC Card Table 2.
3. External View ADP LIGHT CASSIOPEIA POWER 3P Fig. 3.
4. Specifications of Devices 4.1 CPU Table 4.1 CPU Item CPU Clock Specification Hitachi SH-3 (Sindbad) 80 MHz Remark 4.2 Memory Table 4.2 Memory Item DRAM MASK ROM Specification 8 MB 16 MB Remark System memory, object storage memory System ROM 4.3 Touch Panel Table 4.3 Touch Panel Item Specification Type Analog resistance membrane (non-glare) Resolution 480 (H) x 240 (V) dots Remark A/D 10-bit 4.4 Display Table 4.
4.5 Switches Table 4.
3-pin Interface Table 4.8 3-pin Interface Item Synchronization Baud rate Specification Start/stop method 110 bps to 38.4 Kbps Remark 4.7 PC Card Interface Table 4.9 PC Card Interface Item Standard Slot Power supply Applicable card Specification Conforms to PC Card Standard 1 slot, Type II Vcc: 3.3V/5V Refer to Chapter 2.4. PC Card. Remark 4.8 CF Card Interface Table 4.10 CF Card Interface Item Specification Slot 1 slot Power supply Vcc: 3.3V Applicable card Refer to Chapter 2.4. PC Card.
4.9 Power Supply Table 4.11 Power Supply Item Specification Main battery Lithium-ion battery pack Operating time: Approx. 15 hours (adequate for 10 minutes of continuous display, or 1 minute of continuous input) Approx. 10 hours (adequate for 90 Pocket Word strokes/minute) Remark Alkaline dry cell: LR6 x 2 Operating hours: Approx. 25 hours (adequate for 10 minutes of continuous display, or 1 minute of continuous input) Approx.
4.11 Microphone Table 4.13 Microphone Item Microphone Specification Electronic condenser type Sampling rate: 10-bit AD 8/11.025/22.05 KHz Remark For audio input 4.12 LED Table 4.
