User Manual
Table Of Contents
- Cover
- Contents
- Overview and Setup
- Operations Common to All Modes
- Playing on the Keyboard
- Controlling Sounds
- Playing a Built-in Song or a Song on a USB Flash Drive
- Using Auto Accompaniment
- Using Music Preset
- Registering and Restoring a Setup (Registration)
- Recording Your Keyboard Play
- Configuring Function Settings
- USB Flash Drive
- Connecting External Devices
- Connecting to a Computer
- Connecting to Audio Equipment
- Linking with a Smart Device (APP Function)
- Sounding a Bluetooth Audio Capable Device (Bluetooth Audio Pairing)
- Connect the Digital Piano with a Bluetooth Low Energy MIDI Device
- Enabling and Disabling the Digital Piano’s Wireless Function
- Adjusting the Notification Tone Volume Level
- Checking the Bluetooth Connection Status
- Reference
- MIDI Implementation Chart
EN-23
Controlling Sounds
4.
Use the bo dial to select a pedal effect type.
• Available pedal effects are shown in the table below.
You can connect the optionally available 3-Pedal Unit (SP-34)
to the dk PEDAL UNIT jack on the back of the Digital Piano.
You can then use the pedals for expression that is similar to
that available on an acoustic piano.
SP-34 Pedal Functions
● Damper Pedal
Pressing the damper pedal while playing will cause the notes
you play to reverberate. The SP-34 pedal also supports half-
pedal operation, so pressing the pedal part way applies only a
partial damper effect.
● Soft Pedal
Pressing this pedal suppresses notes played on the keyboard
after the pedal was pressed, and makes them sound softer.
● Sostenuto Pedal
Only the notes of the keys that are depressed when this pedal
is pressed are sustained, even if the keyboard keys are
released, until the pedal is released.
You can use the pitch bend wheel to slide the pitch of notes
smoothly upwards and downwards. This capability makes it
possible to reproduce saxophone and electric guitar choking
effects.
1.
While playing a note on the
keyboard, rotate the cq PITCH
BEND wheel on the left of the
keyboard upwards or
downwards.
The amount the note bends depends on
how much you rotate the pitch bend
wheel.
• Do not touch the wheel as you turn on
the keyboard.
• You also can configure pitch bend wheel operation by
specifying the amount of pitch change at maximum rotation
in either direction. See function number 10 (Bend Rng) in
the “Function Setting Item List” (page EN-46).
The transpose feature lets you raise or lower the overall pitch
of the Digital Piano in semitone steps.
You can use this feature to raise or lower the keyboard key
and to play a piece in a key that is more comfortable for you,
or to adjust to a key that better matches a vocalist, etc.
1.
Press bp FUNCTION, and then use the bo dial
to display the “Trans.” setting name.
2.
Press bp ENTER.
This displays the NUM indicator.
3.
Use the bo dial to change the setting.
• You can change the pitch of the keyboard within the
range of –12 to 0 to +12 semitones.
4.
Press bp ENTER to apply the displayed
setting.
This causes the NUM indicator to disappear.
5.
To exit the setting screen, press bq TONE.
Setting
Number
Parameter
(Display)
Description
1Sustain
(Sustain)
Sustains notes played while the
pedal is depressed, even if the
keyboard key is subsequently
released.
Organ and other tones that are
sustained as long as keyboard
key are depressed continue to
sound as long as the pedal is
depressed.
2 Sostenuto
(Sostenut)
Only the notes of the keys that
are depressed when the pedal is
pressed are sustained, even if
the keyboard keys are released,
until the pedal is released.
3 Soft
(Soft)
Slightly lowers and softens notes
played while the pedal is
depressed.
4 Rhythm/Song
(Rhy/Song)
Pressing the pedal starts and
stops Auto Accompaniment or
song playback.
PEDAL UNIT Jack
Soft Pedal
Sostenuto Pedal
Damper Pedal
Using the Pitch Bend Wheel
Changing the Pitch in Semitone
Steps (Transpose)
Trans
.