User Manual
Table Of Contents
- Cover
- Contents
- Overview and Setup
- Operations Common to All Modes
- Playing on the Keyboard
- Controlling Sounds
- Playing a Built-in Song or a Song on a USB Flash Drive
- Using Auto Accompaniment
- Using Music Preset
- Registering and Restoring a Setup (Registration)
- Recording Your Keyboard Play
- Configuring Function Settings
- USB Flash Drive
- Connecting External Devices
- Connecting to a Computer
- Connecting to Audio Equipment
- Linking with a Smart Device (APP Function)
- Sounding a Bluetooth Audio Capable Device (Bluetooth Audio Pairing)
- Connect the Digital Piano with a Bluetooth Low Energy MIDI Device
- Enabling and Disabling the Digital Piano’s Wireless Function
- Adjusting the Notification Tone Volume Level
- Checking the Bluetooth Connection Status
- Reference
- MIDI Implementation Chart
EN-54
You can connect the Digital Piano to a computer and
exchange MIDI data between them. You can send play data
from the Digital Piano to music software running on your
computer, or you can send MIDI data from your computer to
the Digital Piano for playback.
■ Minimum Computer System Requirements
The minimum computer system requirements for sending and
receiving MIDI data are shown below. Check to make sure
that your computer complies with these requirements before
connecting the Digital Piano to it.
● Operating System
Windows 8.1 *
1
Windows 10 *
2
macOS (OS X/Mac OS X) 10.7, 10.8, 10.9, 10.10, 10.11,
10.12, 10.13, 10.14, 10.15, 11.0
*1 Windows 8.1 (32-bit, 64-bit)
*2 Windows 10 (32-bit, 64-bit)
● USB port
• Never connect to a computer that does not conform to
the above requirements. Doing so can cause problems
with your computer.
• For the latest news about supported operating systems,
visit the website at the URL below.
https://support.casio.com/global/en/emi/manual/CDP-S360/
■ Connecting the Digital Piano to Your Computer
• Make sure you follow the steps of the procedure below
exactly. Connecting incorrectly can make data send
and receive impossible.
1.
Turn off the Digital Piano and then start up
your computer.
• Do not start up the music software on your computer
yet!
2.
After starting up your computer, use a
commercially available USB cable to connect it
to the Digital Piano.
• Use a USB 2.0 or 1.1 A-B connector type USB cable.
3.
Turn on the Digital Piano.
• If this is the first time you are connecting the Digital
Piano to your computer, the driver software required to
send and receive data will be installed on your
computer automatically.
4.
Start up commercially available music software
on your computer.
5.
Configure the music software settings to select
“CASIO USB-MIDI” as the MIDI device.
• For information about how to select the MIDI device,
see the user documentation that comes with the music
software you are using.
• Be sure to turn on the Digital Piano first before starting
up your computer’s music software.
• USB send and receive is disabled during playback of a
Song Bank song (page EN-26).
Connecting External Devices
Connecting to a Computer