Service manual
— 17 —
10. PROGRAMMING THE CE-3700 SERIES CASH REGISTERS
The Casio CE-3700 series is capable of a versatile range of features and function that give it the
capability to readily adapt to almost any retail environment. The cash register is programmed at the
factory with the most standard operating features and functions. Your local business requirements,
however, may call for other functions of a totally different keyboard layout.
This section explains the different functions available, as well as the procedures that you can use to
tailor the cash register to specific needs. Programming is simplified through the use of worksheets for
each function, and step-by-step flow charts that walk you through each procedure.
10-1. Setting the proper MODE for programming
• Program Modes and feature
You should perform the procedure shown blow as the first step of programming. Notice that the
flowchart ends with an arrow on the bottom. This indicates that you should continue to the next
programming procedure for the mode you specify.
• Procedure
Set the Mode switch to Program
Enter a number to specify the program mode (1 ~ 4)
Press the
Sub total
key.
The display should show the letter “P” followed by the
program number you specified (i.e. P3 = Program mode 3).
Press the
# 1
key.
Enter 4-digit password.
Skip this step when the password is not programmed.
Press the
Sub total
key.
key on standard keyboard.
Note: Program mode 1 is automatically set when the Mode switch is set to Program from
another setting.
• Recommended programming sequence
Generally, you should perform programming in the following sequence. Note that we recommend you
check what is programmed for each mode before proceeding to the programming operation.
CA/Amt
Tend
Mode Purpose Mode indicator
Program 4
Assignment of 89 functions to programmable keys to create the
desired ke
y
board la
y
out
P4
Program 3
Definition of machine features and key functions that enhance
printin
g
, totalizin
g
, reportin
g
and overall operation
P3
Program 1
Programming of time, date and unit prices, amounts, rates, etc.
for enhanced securit
y
and automatic re
g
istration
P1
Program
Program mode
Sub
Total
#1*
Key
Program mode
Sub
Total