User Manual

20060301

4. Replacing Batteries and Setting Up the

ClassPad

S ClassPad Operation

(1) Making sure that you do not accidentally press the 0 key, attach the front cover to the

ClassPad and then turn the ClassPad over. Remove the battery cover from the ClassPad by

pulling with your finger at the point marked .

(2) Load the four batteries that come with ClassPad.

• Make sure that the positive (+) and negative (–) ends of

the batteries are facing correctly.

Getting Ready

3. Using the Stylus

Slide the stylus from the slot provided for it on the ClassPad, and then use it to perform touch

panel operations.

Important!

• Be careful so that you do not misplace or lose the stylus. When you are not using it, always

keep the stylus in the slot provided for it on the ClassPad.

• Be careful so that you do not damage the tip of the stylus. A damaged tip can scratch or

otherwise damage the ClassPad touch panel.

• Use only the supplied stylus or a similar instrument to perform touch panel operations. Never

use a pen, pencil, or other writing instrument.