User Manual

20060301
Description
• You can perform manual operations on the ClassPad display screen while program
execution is paused by the Pause command.
• Program execution remains paused until you tap the
button on the status bar, or until
six minutes pass (after which program execution resumes automatically).
Return
Syntax: Return
:
{<variable>}
Function 1 (Main Program)
This command terminates program execution.
Function 2 (Subroutine Program)
This command returns from a subroutine.
Tip
• The Return command can be executed during an If, For, Do, While, or Switch process.
• Appending a <variable> to the
Return command in the Main application and executing the
command will cause the variable to be displayed when the program is complete.
Skip
Syntax: Skip
Function: This command causes execution to jump to the statement at the beginning of a
loop.
Description
• Skip causes execution to jump to the statement at the beginning of a loop.
• Skip can be used inside of a For, Do, or While process.
Stop
Syntax: Stop
Function: This command terminates program execution.
Description: This command terminates all program execution, including that of the main
program when a subroutine program is running.
Pause
Syntax: Pause
Function:
This command pauses program execution and displays a pause indicator on the
right side of the status bar.
12-6-13
Program Command Reference
20080201