User manual - CP330PLUS_Hard

20110901

ClassPad Operation

(1) Making sure that you do not accidentally press the o key, attach the front cover to the

ClassPad and then turn the ClassPad over. Remove the battery cover from the ClassPad by

pulling with your finger at the point marked 1.

(2) Load the four batteries that come with ClassPad.

• Make sure that the positive (+) and negative (–) ends of

the batteries are facing correctly.

(3) Replace the battery cover, making sure that its tabs enter

the holes marked 2 and turn the ClassPad front side up.

(4) Remove the front cover from the ClassPad.

(5) Align the touch panel.

a. Your ClassPad should turn on automatically and display

the Touch Panel Alignment screen.

1-4-2

Replacing Batteries and Setting Up the ClassPad