User Manual

9-1

E-CON Graph Window Operations

9 E-CON Graph Window Operations

This chapter explains how to perform zoom, scroll, and other operations while a graph is on

the E-CON Graph window. It also explains how to use various analytical tools.

Note

The E-CON Graph window appears and a data is graphed after either of the following two

events.

• After a sampling operation (except when sampling is performed in the Period mode, or

when [CMA] - [Photogate], [CMA] - [Photogate (Pulley)], [Vernier] - [Photogate] or [Vernier]

- [Photogate (Pulley)] is selected as the sensor)

• After performing the procedure under “Drawing a Graph” on page 8-5

Zooming a Graph

You can use the following procedure to enlarge or reduce the size of a graph on the E-CON

Graph window. You can also select an option that resizes the graph to fit the screen.

To zoom all displayed graphs

(1) On the E-CON Graph window [Zoom] menu tap [All Zoom], or tap the

button.

• This causes the message “Tap Zoom Center” to appear

in the status bar.

(2) Use the stylus to tap the location on the screen that you want at the center of the enlarged

or reduced image.

• This enters the zoom mode.

• Instead of tapping the screen with the stylus, you could use the cursor keys to move the

zoom cursor

to the location you want, and then press

to enter the zoom mode.

(3) The cursor keys perform the following operations in the zoom mode.

• Right and Left Cursor Keys: Enlarges or reduces the graph to the right or left.

• Up and Down Cursor Keys: Enlarges or reduces the graph upwards or downwards.