User Manual

Configuring Function Settings
EN-23
Setting Item List
Item Setting Options Description Remarks

Battery type Alkaline, Nickel metal
hydride
Specifies the type of batteries
being used.
• Each press of the keyboard key sounds a
tone that lets you know what setting was
selected.
One tone: Alkaline
Two tones: Nickel metal hydride

MIDI Out
Channel
1 to 16 Specifies the channel to output
MIDI messages.
• To return the setting to its initial default,
press – and + at the same time.

MIDI Out
Octave shift
–3 to 0 to +3 Specifies, in octave units, the note
message key number for MIDI
Out.
• To return the setting to its initial default,
press – and + at the same time.

MIDI Out
Velocity
Off, 1 to 127 Specifies the velocity of the note
on message for MIDI Out.

Startup volume
level
1 to 10 Specifies the power on volume
level.
• To return the setting to its initial default,
press – and + at the same time.

MY SETUP
Startup
Off, On Enables/disables configuration of
MY SETUP settings when power
is turned on.

Local control Off, On Mutes (Off)/unmutes (On) the
Digital Keyboard sound output of
your keyboard play.

Auto Power Off Off, On Enables/disables Auto Power Off. • Each press of the keyboard key sounds a
tone that lets you know what setting was
selected.
High tone: On (enabled)
Low tone: Off (disabled)

Chord fingering
mode
Off,
CASIO CHORD,
FINGERED 1,
FINGERED 2,
FINGERED ON BASS,
FINGERED ASSIST,
FULL RANGE CHORD
Specifies the chord fingering
mode.
• Each press of the keyboard key sounds a
tone that lets you know what setting was
selected.
One low tone: Off
One high tone: CASIO CHORD
Two high tones: FINGERED 1
Three high tones: FINGERED 2
Four high tones: FINGERED ON BASS
Five high tones: FINGERED ASSIST
Six high tones: FULL RANGE CHORD

Rhythm volume 0 to 10 Adjusts the rhythm volume level. • To return the setting to its initial default,
press – and + at the same time.

Song count Off, Count, Pre-count Can be used to sound a count in
time with song playback.
• Each press of the keyboard key sounds a
tone that lets you know what setting was
selected.
One low tone: Off (disabled)
One high tone: Count
Two high tones: Pre-count

Song volume 0 to 10 Adjusts the song volume level. • To return the setting to its initial default,
press – and + at the same time.

Tempo 20 to 255 Changes the tempo. • To return the setting to its initial default or
recommended setting, press – and + at
the same time.

Initialize Returns all settings to their factory
defaults.