User Manual
Table Of Contents
- Cover
- Contents
- General Guide
- Getting Ready to Play
- Playing on the Keyboard
- Controlling the Sound of a Performance
- Saving and Loading Instrument Settings (MY SETUP)
- Playing a Built-in Song
- Playing with a Rhythm Backing
- Connecting with External Devices
- Configuring Function Settings
- Reference
- MIDI Implementation Chart
EN-6
1.
Press P (Power).
This turns on power.
• To turn off power, long-press P (Power) until the LED
goes out.
2.
Play something on the keyboard.
• Turning off power normally causes the tone and
rhythm number and other settings to return to their
initial defaults. However, the settings below are
remembered.
− MIDI Out Channel
− MIDI Out Octave Shift
− MIDI Out Velocity
− Startup volume level
− MY SETUP Startup
− Auto Power Off
− Battery type
While Auto Power Off is enabled, Digital Keyboard power will
turn off automatically after about 30 minutes of non-operation.
• Auto Power Off is disabled while a song is playing.
■ Disabling Auto Power Off
You can disable Auto Power Off to ensure that power does
not turn off automatically during a concert, etc.
1.
While holding down FUNCTION, press the B}4
keyboard key.
• Each press of the B}4 keyboard key sounds a tone
that lets you know what setting (on or off) was
selected.
High tone: On (enabled)
Low tone: Off (disabled)
• The keyboard input LED is lit while FUNCTION is
depressed.
2.
After disabling Auto Power Off, release
FUNCTION.
Playing on the Keyboard
Turning Power On or Off
Long-press
Auto Power Off
C2 C3 C4 C5 C6 C7
B
}
4