User Manual
Table Of Contents
- Cover
- Contents
- General Guide
- Getting Ready to Play
- Operations Common to All Modes
- Playing on the Keyboard
- Playing Lyric Tones (Vocal Synthesis)
- Selecting and Playing with a Lyric Tone
- Adding Lyric Tones (User Lyric Tones)
- Changing the Voice Use to Sound Lyrics (Vocalist)
- Adjusting the Voice Used to Sound Lyrics
- Setting Other Vocalist Parameters
- Changing the Functions of the Knobs in the Lyric Tone Mode
- Using the Recommended Lyric Tone Settings
- Changing How Lyric Advancement is Performed When a Keyboard Key is Pressed
- Controlling a Lyric Tone with the Keyboard (Lyric Tone Controller)
- Adjusting the Timing When Lyrics are Sounded
- Changing the Syllable Advancement Control Setting in NOTE Mode
- Making the Lyrics Advance Even if You Hold Down Keyboard Keys (Retrigger)
- Making the Retrigger Function Notes Continue to Sound When Keyboard Keys are Released
- Changing the Function of a Pedal in the Lyric Tone Mode
- Controlling the Sound of a Performance
- Selecting a Musical Instrument Tone
- Playing with Touch Response
- Using a Pedal
- Sustaining Notes After Keyboard Keys Are Released
- Switching From the SUS (Sustain) Button to the UPPER PORT (Upper Portamento) Button
- Transitioning Smoothly Between Upper Part Notes (Upper Portamento)
- Using the Pitch Bend Wheel
- Using the Knobs to Change the Sound
- Applying the Effect You Want to a Tone (Active DSP)
- Playing with Reverb
- Adding the Chorus Effect to a Tone
- Delaying Notes (Delay)
- Playing with a More Expanded Sound (Surround)
- Sounding Arpeggio Phrases Automatically (Arpeggiator)
- Switching the Button Function from ARP (Arpeggiator) to AH (Auto Harmonize)
- Adding Harmony to Melody Notes (Auto Harmonize)
- Layering and Splitting Tones
- Changing the Volume Balance Between Keyboard Play and Rhythm Play (Balance)
- Changing the Pitch in Octave Units (Octave Shift)
- Changing the Pitch in Semitone Units (Transpose)
- Fine Tuning (Tuning)
- Changing the Keyboard Scale Tuning
- Using the Equalizer
- Saving and Recalling a Setup (MY SETUP)
- Playing with a Rhythm Backing
- Rhythm
- Using the Rhythms
- Playing a Rhythm
- Using Recommended Rhythm Settings (One Touch Presets)
- Adjusting the Tempo by Tapping (Tap Tempo)
- Sounding Rhythm as You Use Tap Tempo
- Changing the Rhythm Pattern
- Inserting a Fill-in Phrase
- Fingering a Chord to Play a Rhythm Accompaniment
- Starting Rhythm Play when a Chord is Played (Synchro Start)
- Configuring Rhythm Play to Stop Automatically when Chord Play is Stopped (Synchro Stop)
- Changing the Rhythm Pattern and the Fill-in Operation Type
- Disabling Automatic Setting of the Tempo and Pattern when a Rhythm is Selected
- Increasing the Number of Rhythms (User Rhythms)
- Saving and Recalling Setups (Registration)
- Playing a Song
- Recording Your Keyboard Play
- Easy Keyboard Play Recording
- Deleting an Easy Recording
- Overdub Recording (Multi-track Recording)
- Copying a Tone Recording or Rhythm Recording as a Multi-track Recording
- Muting a Multi-track Recording Track
- Adjusting the Volume Level and Pan of Each Track of a Multi-track Recording (Mixing)
- Copying a Multi-track Recording
- Deleting One or More of the Multi-track Recordings in Memory
- Copying the Solo Track of a Multi-track Recording
- Deleting a Multi-track Recording Track
- Recording and Playing the Sounds You Want (Sampling)
- Customizing the Home Screen (Home Customization)
- Configuring Settings
- Using the MIDI Controller
- To change the pitch of NOTE message notes in octave units
- To adjust the velocity of the NOTE ON message in accordance with key press intensity
- Using the Arpeggiator
- Changing the Channel Message Channel
- Sending a Program Change Message
- Sending a Control Change Message
- To switch between the control change MSB and LSB
- To send a system real-time message start/stop
- Using a USB Flash Drive
- Connecting with External Devices
- Linking with a Smart Device and Using Lyric Creator
- Linking with a Smart Device and Using CASIO MUSIC SPACE
- Connecting to a Computer and Using MIDI
- Using a Cable to Connect with an Audio Device
- Sounding a Bluetooth Audio Capable Device (Bluetooth Audio Pairing)
- Deleting Bluetooth Audio Capable Device Pairing Registration
- Connection with a Bluetooth Low Energy MIDI Device
- Disabling Wireless Functions
- Reference
- MIDI Implementation Chart
Customizing the Home Screen (Home Customization)
EN-228
1.
Press MENU.
This displays the menu screen.
2.
Use U and I to select the 5 buttons menu that includes HOME CSTM.
3.
Press HOME CSTM.
This displays the Home Customization screen, which shows Base Display items.
4.
Press 5 BTN (5 buttons).
This displays the 5 buttons (5 BTN) setting screen.
5.
Use U and I to select the button whose function you want to change.
6.
Rotate the dial or use – and + to change the function.
For information about the functions that can be assigned to the 5 buttons see “Home
Customization 5 buttons Function List” (page EN-340).
7.
Press BACK to exit the setting operation.
• With some functions, the current settings of its parameters will appear above the corresponding
5 buttons. In some cases, the current setting name will be abbreviate due to space limitations.
• The target part of recommended functions 1, 2 and 3 of the active DSP that can be assigned to the
5 buttons is the part specified by the effect change part.
• The target part of the active DSP bypass change module that can be assigned to the 5 buttons is the
part specified by the effect change part.
Changing the Function of Each 5 buttons