User Manual
Table Of Contents
- Cover
- Contents
- General Guide
- Getting Ready to Play
- Operations Common to All Modes
- Playing on the Keyboard
- Playing Lyric Tones (Vocal Synthesis)
- Selecting and Playing with a Lyric Tone
- Adding Lyric Tones (User Lyric Tones)
- Changing the Voice Use to Sound Lyrics (Vocalist)
- Adjusting the Voice Used to Sound Lyrics
- Setting Other Vocalist Parameters
- Changing the Functions of the Knobs in the Lyric Tone Mode
- Using the Recommended Lyric Tone Settings
- Changing How Lyric Advancement is Performed When a Keyboard Key is Pressed
- Controlling a Lyric Tone with the Keyboard (Lyric Tone Controller)
- Adjusting the Timing When Lyrics are Sounded
- Changing the Syllable Advancement Control Setting in NOTE Mode
- Making the Lyrics Advance Even if You Hold Down Keyboard Keys (Retrigger)
- Making the Retrigger Function Notes Continue to Sound When Keyboard Keys are Released
- Changing the Function of a Pedal in the Lyric Tone Mode
- Controlling the Sound of a Performance
- Selecting a Musical Instrument Tone
- Playing with Touch Response
- Using a Pedal
- Sustaining Notes After Keyboard Keys Are Released
- Switching From the SUS (Sustain) Button to the UPPER PORT (Upper Portamento) Button
- Transitioning Smoothly Between Upper Part Notes (Upper Portamento)
- Using the Pitch Bend Wheel
- Using the Knobs to Change the Sound
- Applying the Effect You Want to a Tone (Active DSP)
- Playing with Reverb
- Adding the Chorus Effect to a Tone
- Delaying Notes (Delay)
- Playing with a More Expanded Sound (Surround)
- Sounding Arpeggio Phrases Automatically (Arpeggiator)
- Switching the Button Function from ARP (Arpeggiator) to AH (Auto Harmonize)
- Adding Harmony to Melody Notes (Auto Harmonize)
- Layering and Splitting Tones
- Changing the Volume Balance Between Keyboard Play and Rhythm Play (Balance)
- Changing the Pitch in Octave Units (Octave Shift)
- Changing the Pitch in Semitone Units (Transpose)
- Fine Tuning (Tuning)
- Changing the Keyboard Scale Tuning
- Using the Equalizer
- Saving and Recalling a Setup (MY SETUP)
- Playing with a Rhythm Backing
- Rhythm
- Using the Rhythms
- Playing a Rhythm
- Using Recommended Rhythm Settings (One Touch Presets)
- Adjusting the Tempo by Tapping (Tap Tempo)
- Sounding Rhythm as You Use Tap Tempo
- Changing the Rhythm Pattern
- Inserting a Fill-in Phrase
- Fingering a Chord to Play a Rhythm Accompaniment
- Starting Rhythm Play when a Chord is Played (Synchro Start)
- Configuring Rhythm Play to Stop Automatically when Chord Play is Stopped (Synchro Stop)
- Changing the Rhythm Pattern and the Fill-in Operation Type
- Disabling Automatic Setting of the Tempo and Pattern when a Rhythm is Selected
- Increasing the Number of Rhythms (User Rhythms)
- Saving and Recalling Setups (Registration)
- Playing a Song
- Recording Your Keyboard Play
- Easy Keyboard Play Recording
- Deleting an Easy Recording
- Overdub Recording (Multi-track Recording)
- Copying a Tone Recording or Rhythm Recording as a Multi-track Recording
- Muting a Multi-track Recording Track
- Adjusting the Volume Level and Pan of Each Track of a Multi-track Recording (Mixing)
- Copying a Multi-track Recording
- Deleting One or More of the Multi-track Recordings in Memory
- Copying the Solo Track of a Multi-track Recording
- Deleting a Multi-track Recording Track
- Recording and Playing the Sounds You Want (Sampling)
- Customizing the Home Screen (Home Customization)
- Configuring Settings
- Using the MIDI Controller
- To change the pitch of NOTE message notes in octave units
- To adjust the velocity of the NOTE ON message in accordance with key press intensity
- Using the Arpeggiator
- Changing the Channel Message Channel
- Sending a Program Change Message
- Sending a Control Change Message
- To switch between the control change MSB and LSB
- To send a system real-time message start/stop
- Using a USB Flash Drive
- Connecting with External Devices
- Linking with a Smart Device and Using Lyric Creator
- Linking with a Smart Device and Using CASIO MUSIC SPACE
- Connecting to a Computer and Using MIDI
- Using a Cable to Connect with an Audio Device
- Sounding a Bluetooth Audio Capable Device (Bluetooth Audio Pairing)
- Deleting Bluetooth Audio Capable Device Pairing Registration
- Connection with a Bluetooth Low Energy MIDI Device
- Disabling Wireless Functions
- Reference
- MIDI Implementation Chart
Controlling the Sound of a Performance
EN-79
6.
Rotate the dial to change the pedal function.
The table below shows the available pedal function settings.
• After you rotate the dial once to select an option, you can change the selection further using –
and +.
• To go back to the previous screen, press BACK.
7.
Press BACK to return to the pedal screen.
8.
To exit the setting operation, press EXIT.
1.
Press MENU.
This displays the menu screen.
2.
Use U and I to select the 5 buttons menu that includes PEDAL.
3.
Press PEDAL.
This displays the pedal screen.
4.
Press the button for the pedal jack whose part setting you want to change.
This displays the pedal setting screen.
Setting (Display Text) Description
Expression (Expression) Adjusts the volume level independently of the part volume.
Part Volume (Part Volume) Adjusts the part volume level.
Rhythm Volume
(Rhythm Volume)
Adjusts the rhythm volume level.
Master Volume
(Master Volume)
Adjusts the overall volume of the Digital Keyboard independent
of the volume knob.
Tempo (Tempo) Adjusts the tempo.
Disabling the Pedal Effect for Individual Parts