User Manual

Note1: For details about the relationship between the MSB value and the tone, see the Tone List that comes with the

Instrument.

Transmit Sent when a tone setup number is selected.

Receive Receipt causes a change in the tone bank number stored in Instrument memory, but the

tone is not actually changed until a Program Change message is received. For details, see “8 Program

Change”. If speciﬁed by adding 40H to LSB Value, the type of reverb, chorus, and delay will change

according to the tone when the tone is changed in the Program Change message.

If 74H is speciﬁed for the MSB Value, it will operate as a setup recall for the registration function

when a Program Change message is received. The LSB Value will be ”Registration Bank Number - 1”.

(00H-0FH) Setup recall will not be executed until a Program Change message is received. For details,

see “8 Program Change”.

7.2 Modulation wheel or lever (01H)

Message Format: BnH 01H vvH

n: MIDI Channel Number

vv: Value

Transmit Sent when the knob is operated by setting.

Receive Receipt adds, to the tone being sounded, modulation of a depth speciﬁed by the value. In

the case of a tone that already has modulation applied, receipt of this message increases the modulation

depth. The modulation eﬀect diﬀers according to the tone being used.

7.3 Portamento Time (05H)

Message Format: BnH 05H vvH

n: MIDI Channel Number

vv: Value

Transmit Sent when portament time is used. Sent when the knob is operated by setting.

Receive Receipt changes the portamento application time.

7.4 Data Entry (06H,26H)

Message Format: BnH 06H mmH (MSB)

BnH 26H llH (LSB)

n: MIDI Channel Number

mm: MSB Value

ll: LSB Value

Transmit Sent when there is a change to the parameter assigned to RPN, NRPN.

Receive Receipt changes the parameter assigned to RPN, NRPN.