User Manual

13.2.2 GM System Off
Message Format: F0H 7EH 7FH 09H 02H F7H
Receive Receipt changes the sound source setting to the Instrument presetting. System effects of this
instrument will affect parts 33-48 when the MIDI IN 1-5 Ch port setting of this instrument is set to C
port, and parts 1-5 and parts 38-48 when set to A port. For system effects, the settings are applied to
the system effects connected to each part.
13.2.3 GM2 System On
Message Format: F0H 7EH 7FH 09H 03H F7H
Receive Though the Instrument does not support GM2, receipt of the GM2 System On message has
the same result as receipt of the GM System On message. System effects of this instrument will affect
parts 33-48 when the MIDI IN 1-5 Ch port setting of this instrument is set to C port, and parts 1-5
and parts 38-48 when set to A port. For system effects, the settings are applied to the system effects
connected to each part.
13.3 CASIO General System Exclusive
Message Format: F0H 44H 7EH 7FH iiH ccH ssH ggH ppH ddH ... F7H
ii: Device ID (7FH)
cc: Category ID
ss: Sub Category ID
gg: Group ID (00H)
pp: Parameter ID
dd ...: Data
This message can be used to p erform sound source parameter operations.
13.3.1 Reverb Type
Message Format: F0H 44H 7EH 7FH 7FH 04H 00H 00H 00H ccH ttH F7H
cc: Channel(Note1)
tt: Type(Note2)
Note1: For information about the relationship between setting values and send/receive values, see “MIDI Receive Ch” in
“1.3.2 Instrument Part Block” of this document.
Note2: For information about the relationship between setting values and send/receive values, see “14.9 Reverb Type (CASIO
General System Exclusive) Setting Value Table” in “IV Setting Values and Send/Receive Values” of this document.
Transmit Sent when the reverb type is changed.
Receive Receipt changes the reverb type. If the MIDI IN 1-5Ch port setting is A port and Channel
is 1-5 channels (00H-04H), the system effect for keyboard playing parts will be changed. Otherwise the
system effects for other parts will be changed.
24