User Manual
Table Of Contents
- Cover
- Contents
- General Guide
- Getting Ready to Play
- Playing on the Keyboard
- Controlling the Sound of a Performance
- Selecting a Musical Instrument Tone
- Registering a Tone to a Main Tone Button (Tone Memory)
- Playing with Touch Response
- Using a Pedal
- Sustaining Notes After Keyboard Keys Are Released
- Playing with Reverb
- Playing with a Multi-dimensional Expanded Sound (Surround)
- Layering Two Tones
- Changing the Pitch in Octave Units (Octave Shift)
- Changing the Pitch in Semitone Units (Transpose)
- Fine Tuning (Tuning)
- Changing the Keyboard Scale Tuning
- Using the Equalizer
- Recording Your Keyboard Play (MIDI Recorder)
- Saving and Recalling a Setup (MY SETUP)
- Configuring Settings
- Connecting with External Devices
- Linking with a Smart Device (APP Function)
- Connecting to a Computer and Using MIDI
- Using a Cable to Connect with an Audio Device
- Sounding a Bluetooth Audio Capable Device (Bluetooth Audio Pairing)
- Deleting Bluetooth Audio Capable Device Pairing Registration
- Connecting with a Bluetooth MIDI Capable Device
- Turning Off Bluetooth
- Reference
- MIDI Implementation Chart
Controlling the Sound of a Performance
EN-28
■ Disabling the Pedal Function Effect of Each Part
You can use the procedure below to disable the pedal function effect of the main part and layer part.
1.
While holding down FUNCTION, press the G6 or A6 keyboard key.
This disables the pedal function effect.
• Each press of the keyboard key sounds a tone that lets you know what setting was selected.
High tone: On
Low tone: Off
The pedal function effect is applied to parts that are turned on, and not applied to parts that are
turned off.
2.
Release FUNCTION to complete the setting operation.
• For details about parts, see “Layering Two Tones” (page EN-32).
While sustain is enabled, notes are sustained longer when keyboard keys are released.
1.
While holding down FUNCTION, press the C6 keyboard key.
This enables sustain.
• Each press of the keyboard key sounds a tone that lets you know what setting was selected.
High tone: On
Low tone: Off
2.
Release FUNCTION to complete the setting operation.
Sustaining Notes After Keyboard Keys Are Released
C2 C3 C4 C5 C6
C7
G6 (Main part)
A6 (Layer part)
C2 C3 C4 C5 C6
C7
C6
C
C
C6
C6