User Manual
Table Of Contents
- Cover
- Contents
- General Guide
- Getting Ready to Play
- Playing on the Keyboard
- Controlling the Sound of a Performance
- Selecting a Musical Instrument Tone
- Registering a Tone to a Main Tone Button (Tone Memory)
- Playing with Touch Response
- Using a Pedal
- Sustaining Notes After Keyboard Keys Are Released
- Playing with Reverb
- Playing with a Multi-dimensional Expanded Sound (Surround)
- Layering Two Tones
- Changing the Pitch in Octave Units (Octave Shift)
- Changing the Pitch in Semitone Units (Transpose)
- Fine Tuning (Tuning)
- Changing the Keyboard Scale Tuning
- Using the Equalizer
- Recording Your Keyboard Play (MIDI Recorder)
- Saving and Recalling a Setup (MY SETUP)
- Configuring Settings
- Connecting with External Devices
- Linking with a Smart Device (APP Function)
- Connecting to a Computer and Using MIDI
- Using a Cable to Connect with an Audio Device
- Sounding a Bluetooth Audio Capable Device (Bluetooth Audio Pairing)
- Deleting Bluetooth Audio Capable Device Pairing Registration
- Connecting with a Bluetooth MIDI Capable Device
- Turning Off Bluetooth
- Reference
- MIDI Implementation Chart
Controlling the Sound of a Performance
EN-31
1.
While holding down FUNCTION, press the C2 keyboard key.
This turns off reverb.
• Each press of the keyboard key sounds a tone that lets you know what setting was selected.
High tone: On
Low tone: Off
2.
Release FUNCTION to complete the setting operation.
Enabling surround causes sound to expand multi-dimensionally, front, back, left, and right.
1.
Press SURROUND.
This enables surround.
• The SURROUND button will be lit while the surround effect is enabled.
2.
To disable surround, press SURROUND again.
• This causes the SURROUND button light to go out.
• The surround effect is not applied while you are listening over headphones.
• Connecting headphones disables the surround effect.
Turning off Reverb
Playing with a Multi-dimensional Expanded Sound
(Surround)
C2 C3 C4 C5 C6
C7
C2
C2
C2
C2
C2