User Manual
Table Of Contents
- Cover
- Contents
- General Guide
- Getting Ready to Play
- Playing on the Keyboard
- Controlling the Sound of a Performance
- Selecting a Musical Instrument Tone
- Registering a Tone to a Main Tone Button (Tone Memory)
- Playing with Touch Response
- Using a Pedal
- Sustaining Notes After Keyboard Keys Are Released
- Playing with Reverb
- Playing with a Multi-dimensional Expanded Sound (Surround)
- Layering Two Tones
- Changing the Pitch in Octave Units (Octave Shift)
- Changing the Pitch in Semitone Units (Transpose)
- Fine Tuning (Tuning)
- Changing the Keyboard Scale Tuning
- Using the Equalizer
- Recording Your Keyboard Play (MIDI Recorder)
- Saving and Recalling a Setup (MY SETUP)
- Configuring Settings
- Connecting with External Devices
- Linking with a Smart Device (APP Function)
- Connecting to a Computer and Using MIDI
- Using a Cable to Connect with an Audio Device
- Sounding a Bluetooth Audio Capable Device (Bluetooth Audio Pairing)
- Deleting Bluetooth Audio Capable Device Pairing Registration
- Connecting with a Bluetooth MIDI Capable Device
- Turning Off Bluetooth
- Reference
- MIDI Implementation Chart
Controlling the Sound of a Performance
EN-32
You can use the procedure below to layer two tones and output the resulting sound. The part that is
played using a single tone is the main part, while the second part that is layered over the main part is
the layer part.
1.
While holding down FUNCTION, press the C3 keyboard key.
This enables layering.
• Each press of the keyboard key sounds a tone that lets you know what setting was selected.
High tone: On
Low tone: Off
2.
To select the layer part, hold down FUNCTION as you press the E3 keyboard key.
• Do not release FUNCTION until step 3, below.
3.
Press a keyboard key within the range of C2 through C7 to select a tone.
This layers the tone you selected.
• Each of the keyboard keys has a tone assigned to it. For tone information, see the “Tone List”
(page EN-76).
4.
Release FUNCTION to complete the setting operation.
5.
To cancel layering, hold down FUNCTION as you press the C3 keyboard key.
Layering Two Tones
Main part
Layer part
C2 C3 C4 C5 C6
C7
C3
C3
C3
C3
C3
C2 C3 C4 C5 C6
C7
E3