User Manual
Table Of Contents
- Cover
- Contents
- General Guide
- Getting Ready to Play
- Playing on the Keyboard
- Controlling the Sound of a Performance
- Selecting a Musical Instrument Tone
- Registering a Tone to a Main Tone Button (Tone Memory)
- Playing with Touch Response
- Using a Pedal
- Sustaining Notes After Keyboard Keys Are Released
- Playing with Reverb
- Playing with a Multi-dimensional Expanded Sound (Surround)
- Layering Two Tones
- Changing the Pitch in Octave Units (Octave Shift)
- Changing the Pitch in Semitone Units (Transpose)
- Fine Tuning (Tuning)
- Changing the Keyboard Scale Tuning
- Using the Equalizer
- Recording Your Keyboard Play (MIDI Recorder)
- Saving and Recalling a Setup (MY SETUP)
- Configuring Settings
- Connecting with External Devices
- Linking with a Smart Device (APP Function)
- Connecting to a Computer and Using MIDI
- Using a Cable to Connect with an Audio Device
- Sounding a Bluetooth Audio Capable Device (Bluetooth Audio Pairing)
- Deleting Bluetooth Audio Capable Device Pairing Registration
- Connecting with a Bluetooth MIDI Capable Device
- Turning Off Bluetooth
- Reference
- MIDI Implementation Chart
Controlling the Sound of a Performance
EN-37
You can use the procedure below to adjust the overall pitch by changing the frequency of A4. (0.1 Hz
units)
1.
While holding down FUNCTION, press B}3 keyboard key.
• Do not release FUNCTION until step 2, below.
2.
Use keyboard keys C4 through E5 to set the note pitch.
• You can specify a frequency in the range of 415.5 Hz to 440 Hz to 465.9 Hz.
• Each press of the – or + keyboard key decreases or increases the frequency of the A4 note in
0.1 Hz steps. Long-pressing either of these keyboard keys scrolls the setting value.
• A reference tone sounds whenever the setting values becomes an integer (whole number), such
as 440, 441, etc.
• You can use keyboard keys 0 through 9 to input a three-digit integer value and then press
FUNCTION. In this case, the digit to the right of the decimal point will automatically become 0.
• To return the setting to its initial default, press the – and + keyboard keys at the same time.
3.
Release FUNCTION to complete the setting operation.
Fine Tuning (Tuning)
C2 C3 C4 C5 C6
C7
B}3
C2 C3 C4 C5 C6 C7
C4
C
C4
C4
C5
C5
C
C5
0123456789
+−
D4
C{4
C4 E4 F4 G4 A4 B4 C5 D5 E5
E}4