User Manual

Table Of Contents
Saving and Recalling a Setup (MY SETUP)
EN-47
1.
While holding down FUNCTION, press the C7 keyboard key.
Long-pressing the C7 keyboard key will cause the setup saved in MY SETUP to be overwritten with
the current setup. Do not long-press C7 unless you want to do this.
Pressing C7 will sound a notification tone and recall the setup.
2.
Release FUNCTION to complete the setting operation.
Use the procedure below to enable MY SETUP power on recall, which causes the MY SETUP settings
to be applied whenever power is turned on.
1.
While holding down FUNCTION, press the B6 keyboard key.
This enables MY SETUP power on recall.
Each press of the keyboard key sounds a tone that lets you know what setting was selected.
High tone: Enable
Low tone: Disable
2.
Release FUNCTION to complete the setting operation.
Recalling From MY SETUP
Enabling MY SETUP Power On Recall
C2 C3 C4 C5 C6 C7
C7
C7
C7
C7
C7
C2 C3 C4 C5 C6
C7
B6