User Manual
Table Of Contents
- Cover
- Contents
- General Guide
- Getting Ready to Play
- Playing on the Keyboard
- Controlling the Sound of a Performance
- Selecting a Musical Instrument Tone
- Registering a Tone to a Main Tone Button (Tone Memory)
- Playing with Touch Response
- Using a Pedal
- Sustaining Notes After Keyboard Keys Are Released
- Playing with Reverb
- Playing with a Multi-dimensional Expanded Sound (Surround)
- Layering Two Tones
- Changing the Pitch in Octave Units (Octave Shift)
- Changing the Pitch in Semitone Units (Transpose)
- Fine Tuning (Tuning)
- Changing the Keyboard Scale Tuning
- Using the Equalizer
- Recording Your Keyboard Play (MIDI Recorder)
- Saving and Recalling a Setup (MY SETUP)
- Configuring Settings
- Connecting with External Devices
- Linking with a Smart Device (APP Function)
- Connecting to a Computer and Using MIDI
- Using a Cable to Connect with an Audio Device
- Sounding a Bluetooth Audio Capable Device (Bluetooth Audio Pairing)
- Deleting Bluetooth Audio Capable Device Pairing Registration
- Connecting with a Bluetooth MIDI Capable Device
- Turning Off Bluetooth
- Reference
- MIDI Implementation Chart
EN-48
You can use FUNCTION in combination with keyboard keys to configure various settings.
1.
Use “Keyboard Keys Used for Configuring Settings” on page EN-49 to find the
setting item you want and the location on the keyboard for changing its setting.
2.
While holding down FUNCTION, use the keyboard key or keys you looked up in
step 1 of this procedure to configure the setting you want.
• This sounds a notification tone in accordance with the operation you perform.
Example: To enable or disable the notification tone, press the B}6 keyboard key. See
“
el
Notification tone” on page EN-58.
3.
Release FUNCTION to complete the setting operation.
• After performing steps 1 and 2 above, you can configure the settings below by pressing
br
Keyboard keys 0 through 9, or by using the
bs
– and + keyboard keys.
9
Tuning
bn
Part octave shift (main)
bo
Part octave shift (layer)
bp
Part volume (main)
bq
Part volume (layer)
ck
Touch off velocity
cm
Sustain time (main part)
cn
Sustain time (layer part)
dm
MIDI OUT Channel (main part)
dn
MIDI OUT Channel (layer part)
do
Program Change Send
ds
Recorded song volume
Configuring Settings
Setting Operation
C2 C3 C4 C5 C6
C7
B}6