User Manual
Table Of Contents
- Cover
- Contents
- General Guide
- Getting Ready to Play
- Playing on the Keyboard
- Controlling the Sound of a Performance
- Selecting a Musical Instrument Tone
- Registering a Tone to a Main Tone Button (Tone Memory)
- Playing with Touch Response
- Using a Pedal
- Sustaining Notes After Keyboard Keys Are Released
- Playing with Reverb
- Playing with a Multi-dimensional Expanded Sound (Surround)
- Layering Two Tones
- Changing the Pitch in Octave Units (Octave Shift)
- Changing the Pitch in Semitone Units (Transpose)
- Fine Tuning (Tuning)
- Changing the Keyboard Scale Tuning
- Using the Equalizer
- Recording Your Keyboard Play (MIDI Recorder)
- Saving and Recalling a Setup (MY SETUP)
- Configuring Settings
- Connecting with External Devices
- Linking with a Smart Device (APP Function)
- Connecting to a Computer and Using MIDI
- Using a Cable to Connect with an Audio Device
- Sounding a Bluetooth Audio Capable Device (Bluetooth Audio Pairing)
- Deleting Bluetooth Audio Capable Device Pairing Registration
- Connecting with a Bluetooth MIDI Capable Device
- Turning Off Bluetooth
- Reference
- MIDI Implementation Chart
Connecting with External Devices
EN-70
You can use the procedure below to turn off Bluetooth if you do not need to connect via Bluetooth using
the Wireless MIDI & audio adaptor (Option: WU-BT10).
1.
While holding down FUNCTION, long-press the F{5 keyboard key.
A tone will sound and Bluetooth will turn off.
• Long-pressing the F{5 keyboard key again will turn Bluetooth back on.
• Each long-press of the keyboard key sounds a tone that lets you know what setting was
selected.
High tone: Enable*
Low tone: Disable
* If you are using the Wireless MIDI & audio adaptor, a standby tone will sound until Bluetooth
becomes enabled.
2.
Release FUNCTION to complete the setting operation.
Turning Off Bluetooth
C2 C3 C4 C5 C6
C7
F{5