User Manual
Table Of Contents
- Cover
- Contents
- General Guide
- Getting Ready to Play
- Operations Common to All Modes
- Playing on the Keyboard
- Controlling the Sound of a Performance
- Selecting a Musical Instrument Tone
- Playing with Touch Response
- Using a Pedal
- Sustaining Notes After Keyboard Keys Are Released
- Switching From the SUS (Sustain) Button to the UPPER PORT (Upper Portamento) Button
- Transitioning Smoothly Between Upper Part Notes (Upper Portamento)
- Using the Pitch Bend Wheel
- Using the Knobs to Change the Sound
- Playing with Reverb
- Adding the Chorus Effect to a Tone
- Delaying Notes (Delay)
- Playing with a More Expanded Sound (Surround)
- Sounding Arpeggio Phrases Automatically (Arpeggiator)
- Switching the Button Function from ARP (Arpeggiator) to AH (Auto Harmonize)
- Adding Harmony to Melody Notes (Auto Harmonize)
- Layering and Splitting Tones
- Changing the Volume Balance Between Keyboard Play and Rhythm Play (Balance)
- Changing the Pitch in Octave Units (Octave Shift)
- Changing the Pitch in Semitone Units (Transpose)
- Fine Tuning (Tuning)
- Changing the Keyboard Scale Tuning
- Using the Equalizer
- Applying the Effect You Want to a Tone (Active DSP)
- Saving and Recalling a Setup (MY SETUP)
- Playing with a Rhythm Backing
- Rhythm
- Using the Rhythms
- Playing a Rhythm
- Using Recommended Rhythm Settings (One Touch Presets)
- Adjusting the Tempo by Tapping (Tap Tempo)
- Sounding Rhythm as You Use Tap Tempo
- Changing the Rhythm Pattern
- Inserting a Fill-in Phrase
- Fingering a Chord to Play a Rhythm Accompaniment
- Starting Rhythm Play when a Chord is Played (Synchro Start)
- Configuring Rhythm Play to Stop Automatically when Chord Play is Stopped (Synchro Stop)
- Changing the Rhythm Pattern and the Fill-in Operation Type
- Disabling Automatic Setting of the Tempo and Pattern when a Rhythm is Selected
- Increasing the Number of Rhythms (User Rhythms)
- Saving and Recalling Setups (Registration)
- Playing a Song
- Recording Your Keyboard Play
- Easy Keyboard Play Recording
- Deleting an Easy Recording
- Overdub Recording (Multi-track Recording)
- Copying a Tone Recording or Rhythm Recording as a Multi-track Recording
- Muting a Multi-track Recording Track
- Adjusting the Volume Level and Pan of Each Track of a Multi-track Recording (Mixing)
- Copying a Multi-track Recording
- Deleting One or More of the Multi-track Recordings in Memory
- Copying the Solo Track of a Multi-track Recording
- Deleting a Multi-track Recording Track
- Recording and Playing the Sounds You Want (Sampling)
- Customizing the Home Screen (Home Customization)
- Configuring Settings
- Using the MIDI Controller
- To change the pitch of NOTE message notes in octave units
- To adjust the velocity of the NOTE ON message in accordance with key press intensity
- Using the Arpeggiator
- Changing the Channel Message Channel
- Sending a Program Change Message
- Sending a Control Change Message
- To switch between the control change MSB and LSB
- To send a system real-time message start/stop
- Using a USB Flash Drive
- Connecting with External Devices
- Linking with a Smart Device (APP Function)
- Connecting to a Computer and Using MIDI
- Using a Cable to Connect with an Audio Device
- Sounding a Bluetooth Audio Capable Device (Bluetooth Audio Pairing)
- Deleting Bluetooth Audio Capable Device Pairing Registration
- Connection with a Bluetooth Low Energy MIDI Device
- Disabling Wireless Functions
- Reference
- MIDI Implementation Chart
Applying the Effect You Want to a Tone (Active DSP)
EN-103
1.
Press ACTIVE DSP.
This enables Active DSP and displays the Active DSP screen.
• This causes the ACTIVE DSP LED to light.
2.
Press PARAMETER.
This displays the module selection screen.
• You can rotate the dial to change the part effect while this screen is displayed.
3.
Press the button of the module whose parameters you want to change.
This displays the module parameter setting screen.
4.
Use U and I to select the parameter you want to change.
5.
Rotate the dial or use – and + to change the setting.
6.
Press BACK to return to the module selection screen.
7.
To exit the setting operation, press BACK.
• Bypass is a special parameter. Enabling it stops the effect from being applied to the module.
To change effect parameter settings