User Manual

About the Timbre Type Tones that are selected by each Instrument part have an attribute that

depends on the sound source operation type. This attribute is called the “timbre type,” which is one of

the types described below.

• Melody

This timbre type optimizes for normal melody tones. The damper pedal performs on/oﬀ operations.

• Piano

This Timbre Type is for piano tones. The decay rate of the voice being sounded is seamlessly altered

in accordance with the damper pedal position. The method for producing sound in resp onse to the

note messages also is diﬀerent from that of the melody Timbre Type, and operation is optimized

for piano.

• LMPiano

This Timbre Type is for Linear Morphing piano tones. The decay rate of the voice being sounded

and Damper Resonance eﬀect characteristics are seamlessly altered in accordance with the damper

pedal position. The method for producing sound in response to the note messages also is diﬀerent

from that of the melody Timbre Type, and operation is optimized for piano.

• Drum

This setting optimizes for drum sounds. The damper pedal does not function. The Hold1, Channel

Coarse Tune, and Master Coarse Tune messages are ignored if they are received.

9 Channel After Touch

Message Format: DnH vvH

n: MIDI Channel Number

vv: Value

Receive Receipt adds, to the tone being sounded, modulation of a depth speciﬁed by the value. In

the case of a tone that already has modulation applied, receipt of this message increases the modu-

lation

depth. The modulation eﬀect diﬀers according to the tone being used.

10 Pitch Bend

Message Format: EnH llH mmH

n: MIDI Channel Number

ll: Value LSB

mm: Value MSB

Transmit Sent when the bender is operated.

Receive Receipt changes the pitch of the currently sounding note. The range of the pitch change

depends on the Bend Range value setting.