CT-X9000_8000IN_e_Cover1-4.fm 1 ページ ２０１８年４月１２日 木曜日 午後１時２５分 CT-X9000IN CT-X8000IN EN USER’S GUIDE Please keep all information for future reference. Safety Precautions Before trying to use the Digital Keyboard, be sure to read the separate “Safety Precautions”. About Music Score data You can use a computer to download music score data from the CASIO Website. For more information, visit the URL below. http://world.casio.
CT-X9000_8000IN_EN.book 3 ページ ２０１８年４月１２日 木曜日 午後１時８分 Important! Please note the following important information before using this product. • Before using the AD-E24250LW/AD-A12150LW Adaptor to power the unit, be sure to check the AC Adaptor for any damage first. Carefully check the power cord for breakage, cuts, exposed wire and other serious damage. Never let children use an AC adaptor that is seriously damaged. • The product is not intended for children under 3 years.
CT-X9000_8000IN_EN.book 2 ページ ２０１８年４月１２日 木曜日 Playing a Built-in Song or a Song on a USB Flash Drive (Song Bank Mode) Contents General Guide EN-4 Preparing the Music Stand . . . . . . . . . . . . . . . . . . . EN-7 Returning the Digital Keyboard to Its Factory Default Settings . . . . . . . . . . . . . . . . . EN-7 Preparing a Power Supply EN-8 Using the AC Adaptor . . . . . . . . . . . . . . . . . . . . . . . EN-8 CT-X8000IN: Using Batteries . . . . . . . . . . . . . . . . .
CT-X9000_8000IN_EN.book 3 ページ ２０１８年４月１２日 木曜日 午後１時８分 Contents Creating an Auto Accompaniment (User Rhythm) Reference EN-74 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . .EN-121 Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . .EN-123 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . .EN-125 DSP Effect List . . . . . . . . . . . . . . . . . . . . . . . . . . .EN-127 Digital Keyboard Sound Source Configuration and MIDI Channel Assignment . . . . . .
CT-X9000_8000IN_EN.book 4 ページ ２０１８年４月１２日 木曜日 午後１時８分 General Guide • All of the illustrations in this manual show the CT-X9000IN. 3 1 bl bm 2 4 5 67 cl bo cm bp bq br bs bt ck 8 9 bk cq cn co cp cr cs dk ct do dp dq dr el dt bn ek dl dm dn ds em eo en ep en eq eo CT-X9000IN CT-X8000IN • Some of the button names shown here include the $ mark. This indicates that you need to long-press the button to perform its operation.
CT-X9000_8000IN_EN.book 5 ページ ２０１８年４月１２日 木曜日 午後１時８分 General Guide • This manual uses the numbers and names below to refer to buttons, keys, and controllers.
CT-X9000_8000IN_EN.
CT-X9000_8000IN_EN.
CT-X9000_8000IN_EN.book 8 ページ ２０１８年４月１２日 木曜日 午後１時８分 Preparing a Power Supply Your Digital Keyboard uses an AC adaptor for power. • Though the CT-X8000IN supports battery operation, use of an AC adaptor is generally recommended. Using the AC Adaptor Make sure that you use only the AC adaptor specified for this Digital Keyboard. Use of a different type of AC adaptor can cause malfunction.
CT-X9000_8000IN_EN.book 9 ページ ２０１８年４月１２日 木曜日 午後１時８分 Preparing a Power Supply CT-X8000IN: Using Batteries You can use six D-size batteries for power. Turning Power On or Off 1. Connect the Digital Keyboard to a power supply. • Be sure to turn off power before loading batteries. • It is up to you to prepare six commercially available batteries. Do not use oxyride batteries or any other nickel based batteries. 1. Open the battery cover on the bottom of the Digital Keyboard.
CT-X9000_8000IN_EN.book 10 ページ ２０１８年４月１２日 木曜日 午後１時８分 Preparing a Power Supply Auto Resume While Auto Resume is turned on, the current settings of the items described below are retained even when power is turned off (as long as power continues to be supplied to the Digital Keyboard, and power is turned off normally by pressing 1P (power) or by triggering of Auto Power Off).
CT-X9000_8000IN_EN.book 11 ページ ２０１８年４月１２日 木曜日 Connecting to Audio Equipment Digital Keyboard Audio Output Your Digital Keyboard outputs audio from its built-in speakers and/or the PHONES jack. (CT-X9000IN: Also outputs audio from the LINE OUT jacks.) • There will be an indicator mark next to [SPEAKER] while built-in speaker output is enabled.
CT-X9000_8000IN_EN.book 12 ページ ２０１８年４月１２日 木曜日 午後１時８分 Connecting to Audio Equipment Outputting Keyboard Notes to Audio Equipment You can connect audio equipment or a music amplifier to the Digital Keyboard and then play through external speakers for more powerful volume and better sound quality. CT-X9000IN: To connect an external device to the Digital Keyboard’s LINE OUT jacks Connection requires commercially available connecting cords, supplied by you. Audio amplifier AUX IN jacks, etc.
CT-X9000_8000IN_EN.book 13 ページ ２０１８年４月１２日 木曜日 午後１時８分 Connecting to Audio Equipment Playing an External Device from the Digital Keyboard Connection requires commercially available connecting cords, supplied by you. • The connecting cords should have a stereo mini plug on one end and a plug that matches the configuration of the external device on the other end. • Turn off the Digital Keyboard when making connections.
CT-X9000_8000IN_EN.book 14 ページ ２０１８年４月１２日 木曜日 Operations Common to All Modes About this manual Unless otherwise specifically noted, all of the procedures in this manual assume that the Digital Keyboard is in its initial power on state (immediately after you turn on power). If you run into problems with a procedure, turn keyboard power off and back on, and then try performing the procedure again. 午後１時８分 ■ Using the bl Dial You can also change a displayed number or value by rotating the dial.
CT-X9000_8000IN_EN.book 15 ページ ２０１８年４月１２日 木曜日 午後１時８分 Operations Common to All Modes 4 CATEGORY Button The many tones of the Digital Keyboard are divided into 20 categories to help make it possible for you to find a particular tone quickly and easily. You can use the 4 CATEGORY button to select the last tone you selected in a category. Under initial default settings, pressing 4 CATEGORY will select the first tone in a category. • The example below shows how to select a tone using 4 CATEGORY.
CT-X9000_8000IN_EN.book 16 ページ ２０１８年４月１２日 木曜日 午後１時８分 Operations Common to All Modes To modify characters 1. Use the [1] (V) and [3] (W) bm number keys to move the cursor to the position of the character you want to change. 2. Use bn [–] and [+] to change the character. • Repeat steps 1 and 2 as required. • Input of the characters shown in the table below is supported when saving a file to a USB flash drive.
CT-X9000_8000IN_EN.book 17 ページ ２０１８年４月１２日 木曜日 3. Use bn [–] and [+] or the bl dial to change the Touch Response setting value. This operation scrolls through the available Touch Response settings: Off, Light, Normal, and Heavy. Since these are Touch Response settings, the [FUNCTION] indicator flashes while they are displayed. Flashing L i gh t Setting value number 午後１時８分 Listening to Demo Play 1. Press 5 TONE and 6 RHYTHM at the same time.
CT-X9000_8000IN_EN.book 18 ページ ２０１８年４月１２日 木曜日 Playing on the Keyboard Selecting a Tone Your Digital Keyboard comes with a large collection of tones. Select a tone and play something on the keyboard to see what it sounds like. 午後１時８分 CT-X9000IN: To use the TONE Category buttons to select a category • You can use the eo TONE Category buttons to quickly and easily navigate between categories. en TONE GROUP SELECT button To select a tone 1. Press 5 TONE. This displays (tone indicator).
CT-X9000_8000IN_EN.book 19 ページ ２０１８年４月１２日 木曜日 午後１時８分 Playing on the Keyboard Sounding Multiple Tones (Layer and Split) You can split the keyboard into left and right area and assign different tones to each area, and also layer two tones to play at the same time. Split and layer can be used at the same time, which means that you perform with up to four keyboard parts (UPPER 1, LOWER 1, UPPER 2, LOWER 2) at the same time as shown in the illustration below.
CT-X9000_8000IN_EN.book 20 ページ ２０１８年４月１２日 木曜日 午後１時８分 Playing on the Keyboard To move the keyboard split point 1. Hold down dp SPLIT until “Split Pt” is displayed. 2. Use bn [–] and [+] or the bl dial to specify the name of the note (the lowest note of the desired UPPER part) where you want the split point to be. • You can also specify the split point by holding down dp SPLIT and pressing the key where you want the split point to be. • This displays the specified current split point as shown below.
CT-X9000_8000IN_EN.book 21 ページ ２０１８年４月１２日 木曜日 午後１時８分 Playing on the Keyboard To use split and layer together 1. Perform steps 1 through 3 under “To split the keyboard between two tones (Split)” (page EN-19). 2. Perform the procedure below to layer two UPPER part tones. (1) Press dq UPPER LAYER and confirm that the [U2] indicator is displayed. (2) Select the tone you want to assign to UPPER 2. 3. Perform the procedure below to layer two LOWER part tones.
CT-X9000_8000IN_EN.book 22 ページ ２０１８年４月１２日 木曜日 午後１時８分 Playing on the Keyboard Selecting an Effect for a Tone (Reverb, Chorus, Delay) Your Digital Keyboard includes reverb, chorus, and delay effects, which you can use to enhance the sound of tones. ● Reverb (REVERB) Reverb simulates ambient spaces, such as a room or hall. ● Chorus (CHORUS) Chorus adds a rich, shimmering quality to a sound. This digital keyboard applies a preset chorus setting that is suitable for each tone.
CT-X9000_8000IN_EN.book 23 ページ ２０１８年４月１２日 木曜日 午後１時８分 Playing on the Keyboard ■ CT-X8000IN Reverb Effect List Setting Value ■ CT-X9000IN Setting Value Setting Type Display 1 Off Off 2 Room 1 Room 1 3 Room 2 Room 2 4 Room 3 Room 3 5 Room 4 Room 4 6 Room 5 Room 5 7 Room 6 Room 6 8 Room 7 Room 7 9 Room 8 Room 8 10 Room 9 Room 9 11 Large Room 1 L.Room 1 12 Large Room 2 L.
CT-X9000_8000IN_EN.
CT-X9000_8000IN_EN.book 25 ページ ２０１８年４月１２日 木曜日 午後１時８分 Playing on the Keyboard ■ CT-X8000IN Setting Value Using Equalization Setting Type Display You can use equalization to select from among presets that boost or cut specific frequency ranges. The CT-X9000IN also includes a four-band equalizer that allows user-configured settings (User Equalizer).
CT-X9000_8000IN_EN.book 26 ページ ２０１８年４月１２日 木曜日 午後１時８分 Playing on the Keyboard CT-X9000IN: To configure User Equalizer settings 1. Press bk FUNCTION. 2. Use the [1] (V) and [3] (W) bm number keys to display “User EQ”, and then press [6] (ENTER). 3. Configure settings for reach frequency range. (1) Use the [1] (V) and [3] (W) bm number keys to display the menu of the range you want to adjust.
CT-X9000_8000IN_EN.book 27 ページ ２０１８年４月１２日 木曜日 午後１時８分 Playing on the Keyboard Using the Metronome The metronome sounds a regular tone to mark time. Use the metronome when you want to practice playing at a regular tempo. To start or stop the metronome 1. Specify the time signature. • You can specify a time signature numerator (0 to 16) and denominator (4 or 8). (1) Hold down ct METRONOME until “BeatNume” is displayed.
CT-X9000_8000IN_EN.book 28 ページ ２０１８年４月１２日 木曜日 午後１時８分 Playing on the Keyboard 2. To turn the arpeggiator off, press do AUTO HARMONIZE/ARPEGGIATOR. This causes the [ARPEGGIATOR] indicator to disappear. • If the [AUTO HARMONIZE] indicator is displayed instead of the [ARPEGGIATOR] in step 1 of the above procedure, you will need to change the function assigned to the button. Perform the procedure under “To configure function settings with the bk FUNCTION button” (page EN-107) and select “2 Arpeg.
CT-X9000_8000IN_EN.book 29 ページ ２０１８年４月１２日 木曜日 午後１時８分 To connect a pedal to the fo PEDAL1 jack Controlling Sounds Using a Pedal Connecting a pedal lets you perform pedal operations that add various effects during your performances. You can use a pedal to start and stop Auto Accompaniment and Song Bank (page EN-38) song play. • A pedal unit does not come with the Digital Keyboard. Purchase one separately from your retailer. See page EN-3 for information about options.
CT-X9000_8000IN_EN.book 30 ページ ２０１８年４月１２日 木曜日 午後１時８分 Controlling Sounds To connect a pedal to the fp PEDAL2/ EXPRESSION jack 1. Connect a pedal to the fp PEDAL2/ EXPRESSION jack. 2. Press bk FUNCTION. 3. Use the [1] (V) and [3] (W) bm number keys to display “Cntrller”, and then press [6] (ENTER). 4. Use the [1] (V) and [3] (W) keys to display “Pedal”, and then press [6] (ENTER). 5. Use the [1] (V) and [3] (W) keys to display “Pd2 Type”. 6.
CT-X9000_8000IN_EN.book 31 ページ ２０１８年４月１２日 木曜日 午後１時８分 Controlling Sounds ■ Pedal Function List Setting Value 1 Function (Display) Sustain (Sustain) ■ Connectable Expression Pedals Description Sustains notes played while the pedal is depressed, even if the keyboard key is subsequently released. Organ and other tones that are sustained as long as keyboard key are depressed continue to sound as long as the pedal is depressed.
CT-X9000_8000IN_EN.book 32 ページ ２０１８年４月１２日 木曜日 午後１時８分 Controlling Sounds Sliding Smoothly Between Pitches (Portamento) Portamento makes it possible to slide smoothly between notes as is done with string and woodwind instruments. 1. Press dm PORTAMENTO. This displays the [PORTAMENTO] indicator. Displayed • While the above indicator is displayed, sequentially pressing two keyboard keys causes the first pitch to slide smoothly into the next. 2.
CT-X9000_8000IN_EN.book 33 ページ ２０１８年４月１２日 木曜日 午後１時８分 Controlling Sounds To change the operation performed when dt MODULATION/ASSIGNABLE is pressed 1. Press bk FUNCTION. 2. Use the [1] (V) and [3] (W) bm number keys to display “Cntrller”, and then press [6] (ENTER). 3. Use the [1] (V) and [3] (W) keys to display “Mod/Asgn”, and then press [6] (ENTER). This displays “Btn Act”. 1.
CT-X9000_8000IN_EN.book 34 ページ ２０１８年４月１２日 木曜日 午後１時８分 Controlling Sounds 5. Use bn [–] and [+] or the bl dial to specify a DSP module. 6. Use the [1] (V) and [3] (W) bm number keys to display “DSPParam” (the target DSP parameter). This displays the name of the first parameter of the DSP module you selected in step 5. Parameter number Parameter name EQ G a i n 7. Use bn [–] and [+] or the bl dial to display the parameter you want to change when dt MODULATION/ASSIGNABLE is pressed. 8.
CT-X9000_8000IN_EN.book 35 ページ ２０１８年４月１２日 木曜日 午後１時８分 Controlling Sounds To configure the octave shift amount setting for each part 1. Press dr OCTAVE. Number of octaves shifted. 0 (zero) indicates no 1. While holding down dr OCTAVE, press the ds TRANSPOSE [w] or [q] button. U1 Oc t . To use Quick Octave Shift shifting, 1 indicates one octave up, and –1 indicates one octave down. You can specify a value in the range of –3 to +3. Keyboard part.
CT-X9000_8000IN_EN.book 36 ページ ２０１８年４月１２日 木曜日 午後１時８分 Controlling Sounds Performing Master Digital Keyboard and Individual Part Pitch Adjustment Use the procedure below to perform master Digital Keyboard pitch adjustment. When making adjustments, the A4 note (A above middle C) is the tuning standard. To fine tune a pitch (Tuning) 1. Press bk FUNCTION. 2.
CT-X9000_8000IN_EN.book 37 ページ ２０１８年４月１２日 木曜日 午後１時８分 Controlling Sounds To select the temperament of keyboard play 1. Press bk FUNCTION. 2. Use the [1] (V) and [3] (W) bm number keys to display “Scale”, and then press [6] (ENTER). This displays “Type”. 3. Use bn [–] and [+] or the bl dial to change the setting value. • For details about the scales that corresponds to each setting value, see the “Scale List” (page EN-36). 4. Press the [3] (W) bm number key to display “Root”. 5.
CT-X9000_8000IN_EN.book 38 ページ ２０１８年４月１２日 木曜日 Playing a Built-in Song or a Song on a USB Flash Drive (Song Bank Mode) Your Digital Keyboard comes with 30 built-in songs.* You can use built-in songs for listening enjoyment, or you can mute the part of one hand of the piano part and play along for practice. You can also connect a USB flash drive to the Digital Keyboard and use the same operations as those for built-in songs to play MIDI files (SMF or CMF).
CT-X9000_8000IN_EN.book 39 ページ ２０１８年４月１２日 木曜日 午後１時８分 Playing a Built-in Song or a Song on a USB Flash Drive (Song Bank Mode) To select a tone for keyboard play in the Song Bank mode 1. In the Song Bank mode, press 5 TONE. This displays (tone indicator). (song bank indicator) will also remain on the display. 2. Use the bm number keys, bn [–] and [+], or the 3. When playback reaches the beginning of the section you want to loop, press bq A-B.
CT-X9000_8000IN_EN.book 40 ページ ２０１８年４月１２日 木曜日 午後１時８分 Playing a Built-in Song or a Song on a USB Flash Drive (Song Bank Mode) 4. Use bo PART SELECT to select a part to practice. • Each press of bo PART SELECT causes the indicators below to appear or disappear in accordance with the type of song that is selected.
CT-X9000_8000IN_EN.book 41 ページ ２０１８年４月１２日 木曜日 Playing Back a Song from a USB Flash Drive You can use the same operations as those for built-in songs to play back MIDI files* stored in the MUSICDAT folder on a USB flash drive. For information about the procedure for saving a MIDI file to a USB flash drive, see “Using a Computer to Copy General Song Data to a USB Flash Drive” (page EN-118).
CT-X9000_8000IN_EN.book 42 ページ ２０１８年４月１２日 木曜日 5. To stop playback, press 8 AUDIO PLAY/ STOP. This causes the [AUDIO PLAY] indicator to disappear. 6. To exit the Audio Mode, press 7 SONG BANK (AUDIO). This causes the [AUDIO] indicator to disappear. • Playback of an audio file continues even if you exit the Audio Mode. In this case as well, press 8 AUDIO PLAY/ STOP to stop playback. • You can loop playback of an audio file.
CT-X9000_8000IN_EN.book 43 ページ ２０１８年４月１２日 木曜日 午後１時８分 Using Auto Accompaniment (Rhythm Mode) CT-X9000IN: To use the RHYTHM Category buttons to select a category Using Auto Accompaniment To play an Auto Accompaniment • You can use the eq RHYTHM Category buttons to quickly and easily navigate between categories. ep RHYTHM GROUP SELECT button 1. Use the procedure under “Selecting a Rhythm” (page EN-42) to select the rhythm you want to sound. 2.
CT-X9000_8000IN_EN.book 44 ページ ２０１８年４月１２日 木曜日 午後１時８分 Using Auto Accompaniment (Rhythm Mode) 5. Use the dk TEMPO [w] and [q] buttons to change the tempo setting. Tempo Measure Beat • You can also configure the tempo setting before starting Auto Accompaniment. • For information about the tempo setting, see “Changing Auto Accompaniment Speed (Tempo)” (page EN-45). 6.
CT-X9000_8000IN_EN.book 45 ページ ２０１８年４月１２日 木曜日 午後１時８分 Using Auto Accompaniment (Rhythm Mode) Changing Auto Accompaniment Speed (Tempo) There are two ways to change the tempo. • Specifying a beats-per-minute value • Tapping a beat with the dl TAP TEMPO button (tap input) Note Value Indicator and Tempo Value The current tempo value setting is always displayed in the upper right corner of the display. To change the displayed note value 1. Long-press dl TAP TEMPO until the displayed note value changes.
CT-X9000_8000IN_EN.book 46 ページ ２０１８年４月１２日 木曜日 午後１時８分 Using Auto Accompaniment (Rhythm Mode) Creating a Song with an Auto Accompaniment (Accompaniment Pattern) Generally, the progress of a musical piece starts with an intro, transitions to verses that are interspersed with interludes and other changes, and then returns to the main theme before reaching an ending.
CT-X9000_8000IN_EN.book 47 ページ ２０１８年４月１２日 木曜日 午後１時８分 Using Auto Accompaniment (Rhythm Mode) Starting and Stopping Auto Accompaniment with the Accompaniment Keyboard (Synchro Start, Synchro Stop) You can configure settings so Auto Accompaniment starts as soon as you play a chord on the accompaniment keyboard (synchro start) and stops as soon as you release all of the keys on the accompaniment keyboard (synchro stop). To use Synchro Start to start Auto Accompaniment play 1.
CT-X9000_8000IN_EN.book 48 ページ ２０１８年４月１２日 木曜日 午後１時８分 Using Auto Accompaniment (Rhythm Mode) ■ CASIO CHORD ■ FINGERED With CASIO CHORD, you can use simplified fingerings to play the four types of chords described below. With these input modes, you play chords on the accompaniment keyboard using their normal chord fingerings. Some chord forms are abbreviated, and can be fingered with one or two keys.
CT-X9000_8000IN_EN.book 49 ページ ２０１８年４月１２日 木曜日 午後１時８分 Using Auto Accompaniment (Rhythm Mode) To select a chord fingering mode Accompaniment Keyboard Range Setting 1. Press bk FUNCTION. 2. Use the [1] (V) and [3] (W) bm number keys to display “ChordMod”. 3. Use bn [–] and [+] or the bl dial to change the setting value. • The table below shows the relationship between setting values and chord fingering modes.
CT-X9000_8000IN_EN.book 50 ページ ２０１８年４月１２日 木曜日 午後１時８分 Using Auto Accompaniment (Rhythm Mode) ● Chord Point The illustration below shows a keyboard with a chord point specified. The LOWER part keyboard range is not affected in this case. Chord Point To specify the chord point 1. Hold down dp SPLIT until “Split Pt” is displayed. 2. Use the [1] (V) and [3] (W) bm number keys to display “Chord Pt”. 3. Use bn [–] and [+] or the bl dial to specify the note name of the chord point (page EN-50).
CT-X9000_8000IN_EN.book 51 ページ ２０１８年４月１２日 木曜日 午後１時８分 Using Auto Accompaniment (Rhythm Mode) Using Recommended Tones and Tempos (One-Touch Presets) One-Touch Preset gives you one-touch access to tone and tempo settings that go well with the currently selected Auto Accompaniment rhythm pattern. 1. Hold down 6 RHYTHM until the tone name is displayed. This automatically applies the One-Touch Preset settings in accordance with the rhythm pattern that is currently selected. 2.
CT-X9000_8000IN_EN.book 52 ページ ２０１８年４月１２日 木曜日 Using Music Presets Music Presets are a collection of setups with chord progression data. With the touch of a button you can recall one of 310 presets that include tone, rhythm, and other setting data, along with Auto Accompaniment chord progressions, all of which are combined to match specific musical genres and melodies. For details about music preset categories and types, refer to the separate “Appendix”. To perform using a music preset 1.
CT-X9000_8000IN_EN.book 53 ページ ２０１８年４月１２日 木曜日 Using Phrase Pads 午後１時８分 Starting and Stopping Phrase Playback Before playing back a phrase, you must first change to the phrase set where the phrase is located if it is not already assigned to the phrase pads. For details, see “Changing to Another Phrase Set” (page EN-53). Short phrases can be recorded and assigned to each of the four phrase pads. Pressing a pad will loop playback its recorded phrase.
CT-X9000_8000IN_EN.book 54 ページ ２０１８年４月１２日 木曜日 午後１時８分 Using Phrase Pads To stop playback of all phrases 1. To stop phrase playback while a multiple phrases are playing, press cr STOP. To synchronize phrase playback with Auto Accompaniment • The procedure below starts phrase playback and, at the same time, starts Auto Accompaniment in accordance with the operation (pressing ck START/STOP or bo INTRO, etc.) performed in step 2. 1.
CT-X9000_8000IN_EN.book 55 ページ ２０１８年４月１２日 木曜日 午後１時８分 Using Phrase Pads Phrase Playback Setup Items Setup Item (Display) Description Recording a Phrase Settings Looped playback Specifies whether or not to On, Off (Loop) perform loop playback. Off: Plays the phrase all the way through and then stops. On: Loops the phrase. Key shift (KeyShift) Changes the playback pitch in semitone units. A lower setting value lowers the playback pitch, while a higher setting value raises the pitch.
CT-X9000_8000IN_EN.book 56 ページ ２０１８年４月１２日 木曜日 午後１時８分 Using Phrase Pads 6. Press a cq PHRASE PAD button ([P1] to [P4]) to specify the phrase number of the recording destination. • This causes the indicator of the pad you press (P1 to P4) to flash on the display. 7. To start recording, press ck PLAY/STOP or play something on the keyboard. Playing on the keyboard automatically starts recording. This displays the [RECORD] indicator.
CT-X9000_8000IN_EN.book 57 ページ ２０１８年４月１２日 木曜日 午後１時８分 Using Phrase Pads Managing Phrase Sets You can use the procedures in this section to copy and delete phrase sets. To copy a phrase set 1. Perform the procedure 1 through 3 under “To change the phrase set” (page EN-53) to select the number of the phrase set you want to copy. 2. Long-press 8 RECORD/STOP until “Copy” is displayed. 3. Press the [6] (ENTER) bm number key. This displays “Phr Set” and stands by for selection of the copy destination.
CT-X9000_8000IN_EN.book 58 ページ ２０１８年４月１２日 木曜日 午後１時８分 Using Phrase Pads To copy a phrase 1. Use the procedure under “To enter the Phrase Editing mode” (page EN-57) to enter the Phrase Editing mode. 2. Use the [1] (V) and [3] (W) bm number keys to display “Copy”, and then press [6] (ENTER). This displays “Src Set”. 3. Use bn [–] and [+] or the bl dial to specify the number of the phrase set that contains copy source phrase, and then press [6] (ENTER).
CT-X9000_8000IN_EN.book 59 ページ ２０１８年４月１２日 木曜日 午後１時８分 Using Phrase Pads To quantize a phrase To key shift a phrase 1. Use the procedure under “To enter the Phrase 1. Use the procedure under “To enter the Phrase Editing mode” (page EN-57) to enter the Phrase Editing mode. Editing mode” (page EN-57) to enter the Phrase Editing mode. 2. Use the [1] (V) and [3] (W) bm number keys 2. Use the [1] (V) and [3] (W) bm number keys to display “Quantize”, and then press [6] (ENTER).
CT-X9000_8000IN_EN.book 60 ページ ２０１８年４月１２日 木曜日 To configure phrase mixer settings 1. Use the procedure under “To enter the Phrase Editing mode” (page EN-57) to enter the Phrase Editing mode. 2. Long-press 9 PART (MIXER) until the [MIXER] indicator appears. This displays the [KEYBOARD] indicator and mixer part indicator. • Mixer part indicators through correspond to phrase numbers 1 through 4. 3. Use the [1] (V) and [3] (W) bm number keys to select the phrase whose mixer settings you want to configure.
CT-X9000_8000IN_EN.book 61 ページ ２０１８年４月１２日 木曜日 午後１時８分 Muting Specific Parts (Part Mode) 2. Use bn [–] and [+] to select the part group of the part you want to turn on or off. • For example, display the [RHYTHM] indicator. While the [RHYTHM] indicator is displayed, you can turn each Auto Accompaniment part on or off. The mixer part indicator numbers that correspond to the currently sounding Auto Accompaniment will be shown on the display. Mixer Part Indicators (Turned on parts displayed.
CT-X9000_8000IN_EN.book 62 ページ ２０１８年４月１２日 木曜日 午後１時８分 2. Select the part group whose mixer settings you Using the Mixer want to configure. Your Digital Keyboard produces Auto Accompaniment and keyboard play notes using multiple parts. You can use the mixer function to make fine-adjustments to the volume, effect level, and other settings for each of these parts. • You can quickly and easily mute and unmute parts. For details, see “Muting Specific Parts (Part Mode)” (page EN-60).
CT-X9000_8000IN_EN.book 63 ページ ２０１８年４月１２日 木曜日 午後１時８分 Using the Mixer 6. To exit the Mixer mode, press the [4] (EXIT) bm number key. • The displayed, flashing, and not displayed status of mixer part indicators depends on the part on/off status in the Part Mode. For details, see “Muting Specific Parts (Part Mode)” (page EN-60). To select parts with the bm number keys 1.
CT-X9000_8000IN_EN.book 64 ページ ２０１８年４月１２日 木曜日 午後１時８分 Using the Mixer ● SONG SYSTEM Part Group These are the parts of the system track in songs recorded with the MIDI recorder. Part Number Corresponding Part 1 UPPER 1 2 UPPER 2 3 LOWER 1 4 LOWER 2 Advanced Mixer Settings Setting Items for Each Part Group Initial default setting values are indicated by an asterisk (*).
CT-X9000_8000IN_EN.book 65 ページ ２０１８年４月１２日 木曜日 To sound only a selected part 1. Perform steps 1 through 4 under “To configure mixer settings” (page EN-62). 2. To sound only the part whose setting is being configured, press the [6] (ENTER) bm number key. This causes the mixer part indicator of the part whose setting is being configured, the level indicator above it, and marks to the left and right of the level indicators to flash.
CT-X9000_8000IN_EN.book 66 ページ ２０１８年４月１２日 木曜日 午後１時８分 Registering and Restoring a Setup (Registration) Registering a Setup Registration Setting Items Setting items that can be registered are shown below.
CT-X9000_8000IN_EN.book 67 ページ ２０１８年４月１２日 木曜日 午後１時８分 Registering and Restoring a Setup (Registration) Recalling a Registered Setup To recall a setup 1. As required, press cn FREEZE to toggle the freeze function between on and off. • The indicator lamp is lit when the function is on, and unlit when it is off. • For details about the freeze function, see “Freeze Function” below.
CT-X9000_8000IN_EN.book 68 ページ ２０１８年４月１２日 木曜日 午後１時８分 Registering and Restoring a Setup (Registration) Using a Pedal to Cycle Through Multiple Setups (Registration Sequence) Each press of the pedal cycles through the currently selected bank’s registrations (setups) in area number sequence. To play with a Registration Sequence 1. Press bk FUNCTION. 2. Use the [1] (V) and [3] (W) bm number keys to display “Reg Mem” (Registration Memory), and then press [6] (ENTER). 3.
CT-X9000_8000IN_EN.book 69 ページ ２０１８年４月１２日 木曜日 Editing a Tone (User Tones) You can edit a built-in tone to create a user tone, and save up to 100 user tones for later recall. ■ Saving to an External Device User tones can be saved to a USB flash drive or a computer. For details, see “To save Digital Keyboard data to a USB flash drive” (page EN-116) and “Transferring Data Between the Digital Keyboard and a Computer” (page EN-120). Creating a User Tone To edit a tone 1. Select the tone you want to edit.
CT-X9000_8000IN_EN.book 70 ページ ２０１８年４月１２日 木曜日 午後１時８分 Editing a Tone (User Tones) 6. Use the [1] (V) and [3] (W) bm number keys DSP Editing A DSP (Digital Signal Processor) is a type of effect that is connected between the sound source and output. DSP types are equalizer, tremolo, limiter, wah, etc. Many of the built-in tones of your Digital Keyboard are preset with DSPs that are suited for each tone. Such tones are called “DSP tones”.
CT-X9000_8000IN_EN.book 71 ページ ２０１８年４月１２日 木曜日 午後１時８分 Editing a Tone (User Tones) To rename a user tone 1. Select the user tone you want to rename. 2. Hold down 8 RECORD/STOP until “ToneName” appears. 3. Press the [6] (ENTER) bm number key. This displays the renaming screen. 4. Input the new name. • See “Text Character Input” (page EN-15) for information about how to enter text. 5. Press [6] (ENTER). This displays “Sure?” 6. Press bn [+] (YES) to execute the rename To delete a user tone 1.
CT-X9000_8000IN_EN.book 72 ページ ２０１８年４月１２日 木曜日 午後１時８分 Editing a Tone (User Tones) Tone Editing Item List Item Name Attack Time Display Atk.Time Description Settings Adjusts the time after a key is pressed from when the note starts to sound until it reaches maximum volume. A larger value specifies a slower attack. 0 to 127 Volume Note ends Time A R Key pressed Key released A : Attack time R : Release time Release Time Rel.
CT-X9000_8000IN_EN.book 73 ページ ２０１８年４月１２日 木曜日 午後１時８分 Editing a Tone (User Tones) Item Name Display Description Settings Velocity Sense Vel.Sens Specifies how much the tone and/or volume should be affected by keyboard touch (pressure). A larger positive value specifies more brightness and greater volume as keyboard touch becomes stronger. A larger negative value specifies more softness and less volume as keyboard touch becomes stronger.
CT-X9000_8000IN_EN.book 74 ページ ２０１８年４月１２日 木曜日 午後１時８分 Creating a User Rhythm Creating an Auto Accompaniment (User Rhythm) ● Creating an Accompaniment with All New Parts You can record each part of an accompaniment pattern, if you want. Rhythm Configurations The structure of each rhythm is as shown below. ● Editing an Existing Accompaniment Pattern*1 You can use the accompaniment pattern of an existing rhythm as a base and add new recordings of keyboard play to empty parts.
CT-X9000_8000IN_EN.book 75 ページ ２０１８年４月１２日 木曜日 午後１時８分 Creating an Auto Accompaniment (User Rhythm) Creating and Editing a User Rhythm • For information about the mixer part indicator numbers and the part of each accompaniment pattern in the procedure below, see “RHYTHM Part Group” under “List of Parts for Each Mixer Part Group” (page EN-63).
CT-X9000_8000IN_EN.book 76 ページ ２０１８年４月１２日 木曜日 午後１時８分 Creating an Auto Accompaniment (User Rhythm) 6. Configure the tone and octave shift settings of the part, if you want. (1) Select the tone you want to use for part recording. See “Selecting a Tone” (page EN-18). • Only drum set tones can be selected for Drums and Percussion parts. Drum set sounds cannot be selected for the bass and the Chord 1 through Chord 5 parts. (2) Configure the part’s octave shift setting.
CT-X9000_8000IN_EN.book 77 ページ ２０１８年４月１２日 木曜日 午後１時８分 Creating an Auto Accompaniment (User Rhythm) 4. Depending on the accompaniment pattern you 6. Configure the tone and octave shift settings of selected, perform one of the operations below. the part, if you want. Y If you selected Variation 1 to 4 or Fill-in 1 to 4 (1) Select the tone you want to use for part recording. See “Selecting a Tone” (page EN-18). • Only drum set tones can be selected for Drums and Percussion parts.
CT-X9000_8000IN_EN.book 78 ページ ２０１８年４月１２日 木曜日 午後１時８分 Creating an Auto Accompaniment (User Rhythm) To configure only the mixer settings of an existing rhythm and save it 1. Select the built-in rhythm or previously-saved user rhythm you want to edit. • See “Selecting a Rhythm” (page EN-42). 2. Long-press bk FUNCTION until the [EDIT] indicator appears. 3.
CT-X9000_8000IN_EN.book 79 ページ ２０１８年４月１２日 木曜日 午後１時８分 Creating an Auto Accompaniment (User Rhythm) 3. Practice what you will play as required. • To sound the parts of the accompaniment pattern and practice what you plan to play on the keyboard before actually recording it, perform the procedure below. (1) Long-press cm ACCOMP until the [ACCOMP] indicator starts to flash. This enters the Rehearsal Mode.
CT-X9000_8000IN_EN.book 80 ページ ２０１８年４月１２日 木曜日 午後１時８分 Creating an Auto Accompaniment (User Rhythm) ■ User Rhythm Recording Settings Initial default setting values are indicated by an asterisk (*). Item Name (Display) Description Settings Quantize (Quantize) Specify either recording of notes in the timing they are played on the keyboard or automatic alignment of notes based on a note value. Selecting a setting other than “Off” displays a note value (4: quarter note, d: dotted note, t: triplets).
CT-X9000_8000IN_EN.book 81 ページ ２０１８年４月１２日 木曜日 午後１時８分 Creating an Auto Accompaniment (User Rhythm) To copy an existing accompaniment pattern for editing 1. In the Rhythm Editing Mode, select the copy destination accompaniment pattern. • Perform steps 1 to 3 under “To create a totally new rhythm and save it” (page EN-75), or steps 1 to 3 under “To edit an existing rhythm and save it” (page EN-76). 2. Press cs REGISTRATION [1]. This displays “Element”. 3. Press the [6] (ENTER) bm number key.
CT-X9000_8000IN_EN.book 82 ページ ２０１８年４月１２日 木曜日 午後１時８分 Creating an Auto Accompaniment (User Rhythm) 6. Select the part you want to use as the copy source. (1) Press 9 PART and confirm that the lamp to the left of the button is lit. (2) Use the bm number keys [1] through [8] to select the part to be copied. To select this part: Press this number key: Percussion [1] Drums [2] Bass [3] Chord 1 to Chord 5 [4] to [8] (3) Press 9 PART and confirm that the lamp to the left of the button is unlit.
CT-X9000_8000IN_EN.book 83 ページ ２０１８年４月１２日 木曜日 午後１時８分 Creating an Auto Accompaniment (User Rhythm) To save a user rhythm • The operation shown here is performed as the steps of the procedures below. – Step 12 under “To create a totally new rhythm and save it” (page EN-75) – Step 12 under “To edit an existing rhythm and save it” (page EN-76) – Step 8 under “To configure only the mixer settings of an existing rhythm and save it” (page EN-78) 1. Press the [7] (WRITE) bm number key.
CT-X9000_8000IN_EN.book 84 ページ ２０１８年４月１２日 木曜日 午後１時８分 Creating an Auto Accompaniment (User Rhythm) User Rhythm Part Playback Setting Details ■ Chord conversion table (Table) Recording of each accompaniment pattern is normally performed using C major (root of C, major type). When playing an Auto Accompaniment, you can use a root other than C and a chord type other than major, if you want.
CT-X9000_8000IN_EN.book 85 ページ ２０１８年４月１２日 木曜日 午後１時８分 Creating an Auto Accompaniment (User Rhythm) ■ Break Point (Break Pt) This parameter specifies the key, from C to B, that is the point at which Auto Accompaniment bass and chord notes drop one octave.
CT-X9000_8000IN_EN.book 86 ページ ２０１８年４月１２日 木曜日 午後１時８分 Creating an Auto Accompaniment (User Rhythm) To batch clear data recorded in all the accompaniment patterns of a rhythm 1. Perform steps 1 and 2 under “To configure mixer settings for a rhythm” (page EN-85). 2. Use the [1] (V) and [3] (W) bm number keys to display “All Clear”, and then press [6] (ENTER). This displays “Sure?” 3. Press bn [+] (YES) to execute the batch clear operation or bn [–] (NO) to cancel. 4.
CT-X9000_8000IN_EN.book 87 ページ ２０１８年４月１２日 木曜日 Using the MIDI Recorder to Record ■ Recording Track and Recorded Data ● System Track Records operations of the various different performance functions of the Digital Keyboard, including Auto Accompaniment, phrase pads, layer, split, etc. ● Solo Tracks 1 to 16 Record keyboard play using one tone (UPPER 1). These tracks can be overdubbed as shown below.
CT-X9000_8000IN_EN.book 88 ページ ２０１８年４月１２日 木曜日 午後１時８分 Using the MIDI Recorder to Record Starting a Recording Recording can be stared from either of the modes below. When starting from the Song Bank Mode 1. Press 7 SONG BANK to enter the Song Bank Mode. ● Rhythm Mode Press 8 RECORD/STOP and then play something on the keyboard to start recording. This makes it quick and easy to start recording to the system track. 2.
CT-X9000_8000IN_EN.book 89 ページ ２０１８年４月１２日 木曜日 午後１時８分 Using the MIDI Recorder to Record Recording Keyboard Play • The [RECORD] indicator will start to flash during recording when the number of remaining note count is 100 or lower. When there are no more remaining notes, recording stops automatically and the [RECORD] indicator disappears.
CT-X9000_8000IN_EN.book 90 ページ ２０１８年４月１２日 木曜日 午後１時８分 Using the MIDI Recorder to Record To record a new solo track 1. Specify the tempo to use at the start of recording. • See “Changing Auto Accompaniment Speed (Tempo)” (page EN-45). 4. Select the solo track to which you want to record. (1) Long-press 8 RECORD/STOP. • This displays the recording setting screen that you can use to select the recording target track. Re c T r kSy 2. Select the tone you want to use at the start of recording.
CT-X9000_8000IN_EN.book 91 ページ ２０１８年４月１２日 木曜日 午後１時８分 Using the MIDI Recorder to Record To overdub another solo track while playing back recorded tracks 1. Press 7 SONG BANK. 2. Use the bm number keys, bn [–] and [+], or the bl dial to select the number of the song you want to overdub. • Select a user recording song that has at least one track recorded. 3. Select the tone you want to use at the start of recording. (1) Press 5 TONE.
CT-X9000_8000IN_EN.book 92 ページ ２０１８年４月１２日 木曜日 午後１時８分 Using the MIDI Recorder to Record To sound a pre-count or the metronome 1. Press 8 RECORD/STOP. • If you started the operation from the Rhythm Mode, this enters recording standby. Advance to step 2. • If you started the operation from the Song Bank Mode, the Digital Keyboard will display the recording setting screen, so step 2 is not necessary. Proceed to step 3.
CT-X9000_8000IN_EN.book 93 ページ ２０１８年４月１２日 木曜日 午後１時８分 Using the MIDI Recorder to Record 6. Press ck PLAY/STOP. This starts song playback. • Here, you could jump to step 9 of this procedure and immediately start recording. • To stop the overdub recording/punch-in recording operation, press ck PLAY/STOP again. This will cause the [RECORD] indicator to disappear from the display. 7. Use bsdFF and brsREW to navigate to the location from which you want to start recording.
CT-X9000_8000IN_EN.book 94 ページ ２０１８年４月１２日 木曜日 午後１時８分 Using the MIDI Recorder to Record To mute specific tracks 1. Press 7 SONG BANK. 2. Use the bm number keys, bn [–] and [+], or the bl dial to select the song number of a recorded song. 3. Press bo PART SELECT. This displays “TrSyMute”. Current setting Setting name (Indicates system track) T r S yMu t e 4. Use the [1] (V) and [3] (W) bm number keys to select the track you want to mute. 5.
CT-X9000_8000IN_EN.book 95 ページ ２０１８年４月１２日 木曜日 午後１時８分 Using the MIDI Recorder to Record To delete a recorded song 1. Press 7 SONG BANK. 2. Use the bm number keys, bn [–] and [+], or the bl dial to select the number of the song you want to delete. 3. Hold down 8 RECORD/STOP until “Song Clr” appears. 4. Press the [6] (ENTER) bm number key. This displays “Sure?” 5. Press bn [+] (YES) to delete or bn [–] (NO) to cancel the delete operation. 6. To exit the operation, press the [4] (EXIT) bm number key.
CT-X9000_8000IN_EN.book 96 ページ ２０１８年４月１２日 木曜日 午後１時８分 Using the MIDI Recorder to Record Editing an Entire Song in Measure Units (Song Editing) Use the procedure below to edit an entire song (all of the tracks included in the song) in measure units. To copy an entire song in measure units and insert them into a specified location of the same song 1. Perform the procedure under “To enter the Song Editing Mode” (page EN-95).
CT-X9000_8000IN_EN.book 97 ページ ２０１８年４月１２日 木曜日 午後１時８分 Using the MIDI Recorder to Record To delete a specific range of measures from a song • Performing this procedure deletes the measures in the specified range, shifting the measures following the deleted range forward to fill in the space that is created. The total number of measures in the song is reduced by the number of measures that are deleted. 1. Perform the procedure under “To enter the Song Editing Mode” (page EN-95). 2.
CT-X9000_8000IN_EN.book 98 ページ ２０１８年４月１２日 木曜日 午後１時８分 Using the MIDI Recorder to Record To delete specific data from a specified track • The operation below deletes only the data in the table below from the specified tracks. Target Track System Track Deleted Data You can quantize, key shift, delete, or perform other operations in measure units for each track included in a recorded song.
CT-X9000_8000IN_EN.book 99 ページ ２０１８年４月１２日 木曜日 午後１時８分 Using the MIDI Recorder to Record 8. Press [6] (ENTER). This displays “Sure?” 9. Perform the procedure under “To exit the Song Editing Mode operation” (page EN-95). To key shift a specified track in measure units 1. Perform the procedure under “To enter the Song Editing Mode” (page EN-95). 2. Use the [1] (V) and [3] (W) bm number keys to display “Trk Meas”, and then press [6] (ENTER). This displays “Quantize”. 3.
CT-X9000_8000IN_EN.book 100 ページ ２０１８年４月１２日 木曜日 午後１時８分 Using the MIDI Recorder to Record To copy a specified track in measure units and insert them into a specified location of the same track 1. Perform the procedure under “To enter the Song Editing Mode” (page EN-95). 2. Use the [1] (V) and [3] (W) bm number keys to display “Trk Meas”, and then press [6] (ENTER). This displays “Quantize”. 3. Use the [1] (V) and [3] (W) keys to display “Copy”, and then press [6] (ENTER). This displays “Trk Sy” 4.
CT-X9000_8000IN_EN.book 101 ページ ２０１８年４月１２日 木曜日 午後１時８分 Using the MIDI Recorder to Record ■ Tone Number Event The tone number is displayed by the event name “Tone”. Tone number Event name 1. Perform the procedure under “To enter the Song Editing Mode” (page EN-95). 2. Use the [1] (V) and [3] (W) bm number keys To n e to display “TrkEvent”, and then press [6] (ENTER). This displays “Trk Sy” ■ Rhythm Number Event The rhythm number is displayed by the event name “Rhythm”.
CT-X9000_8000IN_EN.book 102 ページ ２０１８年４月１２日 木曜日 午後１時８分 Using the MIDI Recorder to Record Y Note Events (1) Use the [2] (w) and [5] (q) bm number keys to display a note event. (2) Use the [1] (V) and [3] (W) keys to display the parameter you want to change. (3) Use bn [–] and [+] or the bl dial to change the setting value of the displayed parameter. • You can also use the keyboard to specify note numbers.
CT-X9000_8000IN_EN.book 103 ページ ２０１８年４月１２日 木曜日 午後１時８分 Using the MIDI Recorder to Record To delete events in measure units 1. Perform the procedure under “To enter the Song Editing Mode” (page EN-95). 2. Perform steps 2 and 3 under “To edit an event” (page EN-101). 3. Press cs REGISTRATION [8] (EDIT MENU). 4. Use the [1] (V) and [3] (W) bm number keys to display “Clear”, and then press [6] (ENTER). 5.
CT-X9000_8000IN_EN.book 104 ページ ２０１８年４月１２日 木曜日 午後１時８分 Using the MIDI Recorder to Record 5. When you are editing the system track, you 7. Specify the note value (event length) of the can specify the event input target part. event you are about to input in step 8. • See “Selecting a System Track Part” (page EN-105). • This step is not necessary when you are editing a solo track. Proceed to step 6. 6.
CT-X9000_8000IN_EN.book 105 ページ ２０１８年４月１２日 木曜日 午後１時８分 Using the MIDI Recorder to Record 6. Press cs REGISTRATION [1]. ■ Selecting a System Track Part When the system track is specified as the event edit target track, you can use the buttons below to select the part to be edited. You can find out the selection status of each part by checking for the indicators shown in the “Display” column of the table.
CT-X9000_8000IN_EN.book 106 ページ ２０１８年４月１２日 木曜日 午後１時８分 Using the MIDI Recorder to Record Recorded Song Mixer Settings You can configure the mixer settings of each part of the system track and the solo tracks of a recorded song. To configure the mixer settings of a recorded song 1. Perform the procedure under “To enter the Song Editing Mode” (page EN-95). 2. Long-press 9 PART (MIXER) until the [MIXER] indicator appears.
CT-X9000_8000IN_EN.book 107 ページ ２０１８年４月１２日 木曜日 午後１時８分 Configuring Function Settings Use the procedures in this section to configure master Digital Keyboard settings. The procedure uses the bk FUNCTION button. • When power is turned off by pressing 1P (power) or by triggering of Auto Power Off (page EN-9) while Auto Resume (page EN-10) is turned off, all settings, except for those below, are returned to their initial defaults.
CT-X9000_8000IN_EN.
CT-X9000_8000IN_EN.
CT-X9000_8000IN_EN.book 110 ページ ２０１８年４月１２日 木曜日 午後１時８分 Configuring Function Settings Function Name Split Display Settings See Page Split – Split Point Split Pt 36 to 96 EN-20 Lower Point Lower Pt 36 to 96 EN-50 Chord Point Chord Pt 36 to 96 EN-50 Chord Input Priority Mode EN-20, 49 Cd Prior On, Off EN-50 Auto Accompaniment volume AcompVol 0 to 127 EN-44 Song volume Song Vol 0 to 127 EN-39 Tuning Tune – EN-36 EN-36 Master Digital Keyboard tuning MstrTune 415.
CT-X9000_8000IN_EN.
CT-X9000_8000IN_EN.
CT-X9000_8000IN_EN.book 113 ページ ２０１８年４月１２日 木曜日 午後１時８分 Configuring Function Settings Examination Mode The Examination Mode changes the operation of the Digital Keyboard as described below to provide support for those taking a musical instrument grade test. ● Accompaniment Pattern Operations • If the Digital Keyboard is in synchro start standby (page EN-47) while ACCOMP is off ([ACCOMP] indicator not displayed), rhythm will start when you play something anywhere on the keyboard.
CT-X9000_8000IN_EN.book 114 ページ ２０１８年４月１２日 木曜日 USB Flash Drive Your Digital Keyboard supports the use of a commercially available USB flash drive to perform the operations below.
CT-X9000_8000IN_EN.book 115 ページ ２０１８年４月１２日 木曜日 午後１時８分 USB Flash Drive To connect a USB flash drive to the Digital Keyboard 1. As shown in the illustration below, insert the USB flash drive into the Digital Keyboard’s USB flash drive port. • Carefully push the USB flash drive in as far as it will go. Do not use undue force when inserting the USB flash drive. USB flash drive port To format a USB flash drive 1.
CT-X9000_8000IN_EN.book 116 ページ ２０１８年４月１２日 木曜日 午後１時８分 USB Flash Drive USB Flash Drive Operations You can use Digital Keyboard operations to perform data storage, data import, data delete, and data renaming operations for a USB flash drive plugged into the Digital Keyboard. These operations can be performed on the data listed below.
CT-X9000_8000IN_EN.book 117 ページ ２０１８年４月１２日 木曜日 午後１時８分 USB Flash Drive To load data from a USB flash drive to Digital Keyboard memory 1. Perform steps 1, 2, and 3 under “To save Digital Keyboard data to a USB flash drive” (page EN-116). 2. Use the [1] (V) and [3] (W) bm number keys to display “Load”, and then press [6] (ENTER). To delete USB flash drive data 1. Perform steps 1, 2, and 3 under “To save Digital Keyboard data to a USB flash drive” (page EN-116). 2.
CT-X9000_8000IN_EN.book 118 ページ ２０１８年４月１２日 木曜日 午後１時８分 USB Flash Drive To rename USB flash drive data 1. Perform steps 1, 2, and 3 under “To save Digital Keyboard data to a USB flash drive” (page EN-116). 2. Use the [1] (V) and [3] (W) bm number keys to display “Rename”, and then press [6] (ENTER). 3. Use the [1] (V) and [3] (W) keys to display a sub-menu of options that correspond to the type of data being renamed. • See “Sub Menu/File Name Extension List” (page EN-116). 4. Press [6] (ENTER).
CT-X9000_8000IN_EN.book 119 ページ ２０１８年４月１２日 木曜日 Connecting a Computer Connecting a Computer You can connect the Digital Keyboard to a computer and exchange MIDI data between them. You can send play data from the Digital Keyboard to music software running on your computer, or you can send MIDI data from your computer to the Digital Keyboard for playback. Minimum Computer System Requirements The following shows the minimum computer system requirements for sending and receiving MIDI data.
CT-X9000_8000IN_EN.book 120 ページ ２０１８年４月１２日 木曜日 午後１時８分 Connecting a Computer MIDI Settings Keyboard Channel This parameter specifies the channel to be used when keyboard performance information is sent from this Digital Keyboard to a computer. Perform the procedure under “To configure function settings with the bk FUNCTION button” (page EN-107) and configure the following setting: Keyboard Channel (Keybd Ch) (page EN-112).
CT-X9000_8000IN_EN.book 121 ページ ２０１８年４月１２日 木曜日 午後１時８分 Reference Troubleshooting Symptom Action Included Accessories I can’t find something that should be here. Carefully check inside all of the packing materials. Power Requirements Power will not turned on. • Check the AC adaptor (page EN-8). • CT-X8000IN: Make sure that the batteries are facing correctly (page EN-9). Replace the batteries with new ones (page EN-9) or switch over to AC adaptor power (page EN-8).
CT-X9000_8000IN_EN.book 122 ページ ２０１８年４月１２日 木曜日 午後１時８分 Reference Symptom Action Some notes are cut off while they are playing. Notes are cut off whenever the number of notes being sounded exceeds the maximum polyphony value of 64 (32 for some tones). This does not indicate malfunction. The volume or tone setting I made has changed. • Adjust the volume setting (page EN-11) and the equalizer setting (page EN-25).
CT-X9000_8000IN_EN.book 123 ページ ２０１８年４月１２日 木曜日 午後１時８分 Reference Error Messages Display Cause Action Err Limit You are attempting to record more than 999 measures. Make your recordings up to 999 measures long. Err Mem Full You are attempting a recording that exceeds the allowable per-song limit. Keep song recordings with the allowable per-song limit. You are attempting a recording that exceeds the allowable per-phrase limit. Keep phrase recordings with the allowable per-phrase limit.
CT-X9000_8000IN_EN.book 124 ページ ２０１８年４月１２日 木曜日 午後１時８分 Reference Display Err WrongDat Err Format EN-124 Cause Action The USB flash drive data is corrupted. – USB flash drive contains data that is not supported by this Digital Keyboard. – The USB flash drive format is not compatible with this Digital Keyboard. • Use a computer or other device to change the USB flash drive format to something that is compatible with the Digital Keyboard (page EN-115). • Use a different USB flash drive.
CT-X9000_8000IN_EN.book 125 ページ ２０１８年４月１２日 木曜日 午後１時８分 Reference Specifications Model CT-X9000IN Keyboard 61 standard size keys Touch Response Maximum Polyphony CT-X8000IN Sensitivity: 3 types, Off 64 notes (32 for certain tones) Tones Preset Tones 800 User Tones 100 (See “Tone Editing” item of these specifications.
CT-X9000_8000IN_EN.
CT-X9000_8000IN_EN.book 127 ページ ２０１８年４月１２日 木曜日 午後１時８分 Reference DSP Effect List DSP Module List Module Number Module Name Display Description Mono 1-Band EQ Mono 1EQ This is a single-band monaural equalizer. Mono 2-Band EQ Mono 2EQ This is a dual-band monaural equalizer. Mono 3-Band EQ Mono 3EQ This is a three-band monaural equalizer. Stereo 1-Band EQ Streo1EQ This is a single-band stereo equalizer.
CT-X9000_8000IN_EN.book 128 ページ ２０１８年４月１２日 木曜日 午後１時８分 Reference DSP Parameter List Module Name Display Description Parameter Data Mono 1-Band EQ Settings This is a single-band monaural equalizer. EQ Freq EQ Frequency Adjusts the center frequency of Equalizer. *1 EQ Gain EQ Gain Adjusts the gain of Equalizer. –12 to 00 to 12 In Level Input Level Adjusts the input level. 000 to 127 WetLevel Wet Level Adjusts the level of the effect sound.
CT-X9000_8000IN_EN.book 129 ページ ２０１８年４月１２日 木曜日 午後１時８分 Reference Module Name Display Description Parameter Data Stereo 3-Band EQ Settings This is a three-band stereo equalizer. EQ1 Freq EQ1 Frequency Adjusts the center frequency of Equalizer 1. *1 EQ1 Gain EQ1 Gain Adjusts the gain of Equalizer 1. –12 to 00 to 12 EQ2 Freq EQ2 Frequency Adjusts the center frequency of Equalizer 2. *1 EQ2 Gain EQ2 Gain Adjusts the gain of Equalizer 2.
CT-X9000_8000IN_EN.book 130 ページ ２０１８年４月１２日 木曜日 午後１時８分 Reference Module Name Display Description Parameter Data Compressor Settings Compresses the input signal, which can have the effect of suppressing level variation. Attack Attack Adjusts the time until compression goes into effect. A smaller value causes prompt compressor operation, which suppresses the attack of the input signal. A larger values delays compressor operation, which causes the attack of the input signal to be output as-is.
CT-X9000_8000IN_EN.book 131 ページ ２０１８年４月１２日 木曜日 午後１時８分 Reference Module Name Display Description Parameter Data Phaser Settings Produces a distinctive pulsating, broad sound by using an LFO to change the phase of the input signal and then mixes it with the original input signal. Resonanc Resonance Adjusts the strength of feedback 000 to 127 Manual Manual Adjusts the reference phaser shift amount. –64 to 00 to 63 Rate LFO Rate Adjusts the LFO rate.
CT-X9000_8000IN_EN.book 132 ページ ２０１８年４月１２日 木曜日 午後１時８分 Reference Module Name Display Description Parameter Data Drive Rotary Settings This is a rotary speaker simulator that makes overdrive possible. Type Type Selects the rotary speaker type. 0 to 3 OD Gain Overdrive Gain Adjusts overdrive gain. 000 to 127 OD Level Overdrive Level Adjusts the overdrive output level. 000 to 127 Speed Speed Switches the speed mode between fast and slow.
CT-X9000_8000IN_EN.book 133 ページ ２０１８年４月１２日 木曜日 午後１時８分 Reference Module Name Display Description Parameter Data Reflection Settings Simulates the initial reflection of reverberation. Applies acoustic presence to notes. WetLevel Wet Level Adjusts the level of the effect sound. 000 to 127 Feedback Feedback Adjusts the repeat of the reflected sound. 000 to 127 Tone Tone Adjusts the tone of the reflected sound. 000 to 127 In Level Input Level Adjusts the input level.
CT-X9000_8000IN_EN.book 134 ページ ２０１８年４月１２日 木曜日 午後１時８分 Reference Module Name Display Description Parameter Data Auto Wah Settings This is a “wah” effect that can automatically shift the frequency in accordance with the level of the input signal. In Level Input Level Adjusts the input level. The input signal can become distorted when the level of the sound being input, the number of chords, or the Resonance value is large. Adjust this parameter to eliminate such distortion.
CT-X9000_8000IN_EN.book 135 ページ ２０１８年４月１２日 木曜日 午後１時８分 Reference Module Name Display Description Parameter Data Distortion Settings Distortion, wah, and amp simulator combined into a single effect. DistGain Dist Gain Adjusts the distortion input signal gain. 000 to 127 Dist Lvl Dist Level Adjusts the distortion output level. 000 to 127 Dist Low Dist Low Adjusts the distortion low-range gain. 000 to 127 DistHigh Dist High Adjusts the distortion high-range gain.
CT-X9000_8000IN_EN.
CT-X9000_8000IN_EN.book 137 ページ ２０１８年４月１２日 木曜日 午後１時８分 Reference Digital Keyboard Sound Source Configuration and MIDI Channel Assignment The sound source of the Digital Keyboard is divided among four part groups: KEYBOARD, RHYTHM, SONG SYSTEM, SONG SOLO. The roles assigned to each part of the part groups are a shown in the “Part” column of the table below.
CT-X9000_8000IN_EN.book 138 ページ ２０１８年４月１２日 木曜日 午後１時８分 Reference ■ External MIDI Device Operations by the Digital Keyboard • For the MIDI OUT channel of keyboard performance data output, the n-value specified by “Keyboard Channel” (page EN-120) is applied to the Upper 1 part. MIDI OUT channels for the following are based on the MIDI OUT channel of the Upper 1 part: Upper 2 = n+1, Lower 1 = n+2, Lower 2 = n+3, and Auto Harmonize = n+4.
CT-X9000_8000IN_EN.book 139 ページ ２０１８年４月１２日 木曜日 午後１時８分 Reference Operating Precautions Be sure to read and observe the following operating precautions. ■ Location Avoid the following locations for this product. • Areas exposed to direct sunlight and high humidity • Areas subjected to temperature extremes • Near a radio, TV, video deck, or tuner The above devices will not cause malfunction of the product, but interference from the product can cause audio or video interference of a nearby device.
CT-X9000_8000IN_EN.book 1 ページ ２０１８年４月１２日 木曜日 Appendix Fingering Guide FINGERED 1, FINGERED 2 Chords Song List No. 午後１時８分 Title C WORLD (CATEGORY : 01) 001 WHEN THE SAINTS GO MARCHING IN 002 AMAZING GRACE 003 HOME ON THE RANGE 004 SANTA LUCIA 005 WALTZING MATILDA 006 CAMPTOWN RACES PIANO/CLASSICS (CATEGORY : 02) 007 JE TE VEUX 008 SONATA op.13 “PATHÉTIQUE” 2nd Mov. 009 HABANERA FROM “CARMEN” 010 MINUET IN G MAJOR 011 ODE TO JOY 012 GYMNOPÉDIES no.
CT-X9000_8000IN_EN.book 2 ページ ２０１８年４月１２日 木曜日 午後１時８分 Appendix Cadd9 Cmadd9 C69 *3 Cm69 *3 C7( 9) C7(9) C7(#9) C7(#11) C7( 13) C7(13) FINGERED ON BASS, FULL RANGE CHORD In addition to the chords that can be fingered with FINGERED 1 and FINGERED 2, the following chords also are recognized.
A-3 *1 (D#)/Eb E F # F /(Gb) G (G#)/Ab • You can use the split point to change the size of the accompaniment keyboard range (page EN-20, 49). *1 Root *2 Chord Type m6 6 69 dim7 mM7 madd9 add9 7sus4 7b5 m7b5 D A (A#)/Bb B 木曜日 M7 # C /(Db) ２０１８年４月１２日 m7 7 sus2 sus4 C 3 ページ aug dim m M *2 Chord Example List CT-X9000_8000IN_EN.
CT-X9000_8000IN_EN.
Key’s Ch’s After Touch Control Change Pitch Bender Note ON Note OFF Velocity True voice 0 1 5 6, 38 7 10 11 64 65 66 67 71 72 73 74 76 X *4 X *4 * O CT-X9000IN: O, CT-X8000IN: X X O *2 O O O *3 O *3 O O *3 O *3 X *4 X *4 X *4 O O O O O O O *2 O O O O O O O O O O O X O O 9nH v = 1 - 127 O 8nH v = 0 - 127, 9nH v = 0 O 9nH v = 1 - 127 O 8nH v = 0 - 127 X X 0 - 127 0 - 127 *1 Mode 3 X 12 - 120 Mode 3 X Default Messages Altered Mode 1 - 16 1 - 16 Filter cutoff Vibrato rate Bank select M
0 1 5 6, 38 7 10 11 64 65 66 67 71 72 73 *2 *4 *4 *4 *4 Aux Messages Mode 1 : OMNI ON, POLY Mode 3 : OMNI OFF, POLY Filter cutoff Vibrato rate Vibrato depth Vibrato delay Portamento Control Reverb send level Chorus send level Delay send level RPN LSB, MSB Bank select Modulation Portamento Time Data entry LSB, MSB Volume Pan Expression Hold 1 Portamento Switch Sostenuto Soft pedal Filter resonance Release time Attack time Mode 2 : OMNI ON, MONO Mode 4 : OMNI OFF, MONO *1: Depends on tone.
CT-X9000_8000IN_e_Cover1-4.fm 1 ページ ２０１８年４月１２日 木曜日 午後１時２５分 CT-X9000IN CT-X8000IN EN USER’S GUIDE Please keep all information for future reference. Safety Precautions Before trying to use the Digital Keyboard, be sure to read the separate “Safety Precautions”. About Music Score data You can use a computer to download music score data from the CASIO Website. For more information, visit the URL below. http://world.casio.
