User Manual

Playing on the Keyboard
EN-26
1. Press bk FUNCTION.
2. Use the [1] (V) and [3] (W) bm number keys
to display “User EQ”, and then press [6]
(ENTER).
3. Configure settings for reach frequency range.
(1) Use the [1] (V) and [3] (W) bm number keys to
display the menu of the range you want to adjust.
(2) Press [6] (ENTER).
• This automatically changes the “Equalizr” setting
to “User”. See “To select an equalization setting”
(page EN-25).
(3) Use the [1] (V) and [3] (W) keys to display “***
Freq” (Center Frequency or Cutoff Frequency) or “***
Gain” (Gain).
What appears in place of “***” in the above menu
items depends on the frequency range being
equalized.
(4) Use bn [–] and [+] or the bl dial to change the
setting value.
For details about setting values and their settings,
see the “User Equalizer Setting List” below.
(5) Press the [4] (EXIT) bm number key.
(6) Repeat steps (1) through (5) as required to configure
the settings of other frequency ranges.
4. Configure input level and output level settings
as required.
(1) Use the [1] (V) and [3] (W) bm number keys to
display “Input Lv” (Input Level), and then use bn [–]
and [+] or the bl dial to change the setting value.
(2) Use the [1] (V) and [3] (W) keys to display
“OutputLv” (Output Level), and then use bn [–] and
[+] or the bl dial to change the setting value.
5. When the setting is the way you want, long-
press the [4] (EXIT) bm number key to exit the
setting screen.
■ User Equalizer Setting List
*1 Setting values 1 through 13 (A in the table below)
correspond to cutoff frequencies 50 Hz to 800 Hz (B in the
table below).
*2 Setting values 1 through 20 (A in the table below)
correspond to center frequencies 100Hz to 8.0kHz (B in
the table below).
*3 Setting values 1 through 10 (A in the table below)
correspond to cutoff frequencies 2.0kHz to 16kHz (B in the
table below).
CT-X9000IN: To configure User Equalizer
settings
To adjust this range: Display this:
Low-range (50 Hz to 800 Hz) EQ Low
Mid-range 1 (100 Hz to 8 kHz) EQ Mid1
Mid-range 2 (100 Hz to 8 kHz) EQ Mid2
High-range (2 kHz to 16 kHz) EQ High
Setting Item Display Settings
Low-range EQ Low
Cutoff Frequency Low Freq 1 to 13 *
1
Gain Low Gain –12 to 12
Mid-range 1 EQ Mid1
Center Frequency Mid1Freq 1 to 20 *
2
Gain Mid1Gain –12 to 12
Mid-range 2 EQ Mid2
Center Frequency Mid2Freq 1 to 20 *
2
Gain Mid2Gain –12 to 12
High-range EQ High
Cutoff Frequency HighFreq 1 to 10 *
3
Gain HighGain –12 to 12
Input Level Input Lv 0 to 127
Output Level OutputLv 0 to 127
A 1 2 3 4 5
B 50Hz 63Hz 80Hz 100Hz 125Hz
A 6 7 8 9 10
B 160Hz 200Hz 250Hz 315Hz 400Hz
A 11 12 13
B 500Hz 630Hz 800Hz
A 1 2 3 4 5
B 100Hz 125Hz 160Hz 200Hz 250Hz
A 6 7 8 9 10
B 315Hz 400Hz 500Hz 630Hz 800Hz
A 11 12 13 14 15
B 1.0kHz 1.3kHz 1.6kHz 2.0kHz 2.5kHz
A 16 17 18 19 20
B 3.2kHz 4.0kHz 5.0kHz 6.3kHz 8.0kHz
A 1 2 3 4 5
B 2.0kHz 2.5kHz 3.2kHz 4.0kHz 5.0kHz
A 6 7 8 9 10
B 6.0kHz 8.0kHz 10kHz 13kHz 16kHz
CT-X9000_8000IN_EN.book 26 ページ ２０１８年４月１２日 木曜日 午後１時８分