User Manual

EN-60
1. Use the procedure under “To enter the Phrase
Editing mode” (page EN-57) to enter the Phrase
Editing mode.
2. Long-press 9 PART (MIXER) until the
[MIXER] indicator appears.
This displays the [KEYBOARD] indicator and mixer
part indicator.
• Mixer part indicators through correspond to
phrase numbers 1 through 4.
3. Use the [1] (V) and [3] (W) bm number keys
to select the phrase whose mixer settings you
want to configure.
4. Use the [2] (w) and [5] (q) bm number keys to
display the menu item you want to change.
• Initial default setting values are indicated by an
asterisk (*).
5. Use bn [–] and [+] or the bl dial to change the
setting value.
6. To exit the operation, long-press the [4] (EXIT)
bm number key.
Your Digital Keyboard produces Auto Accompaniment and
keyboard play notes using multiple parts. You can use the
part on/off function to easily mute and unmute one or more
parts. For example, you can mute all parts except for the
drum, percussion, and bass parts of the Auto
Accompaniment.
The example below shows how to turn each Auto
Accompaniment part on or off. If you perform this operation
while an Auto Accompaniment is sounding, you can compare
what the accompaniment sounds like with and without the
part.
1. Press 9 PART.
This causes the indicator lamp to the left of the button to
light (Part Mode).
This displays the name of the currently selected part
group.
• For details about part groups, see “Part On/Off
Function Part Groups” (page EN-61).
To configure phrase mixer settings
Item Name
(Display)
Description Settings
Tone (Tone) Changes the phrase
tone.
0 to 900
Volume
(Volume)
Adjusts the phrase
volume level.
0 to 100* to 127
Pan (Pan) Adjusts the stereo
position of the phrase. 0
indicates the center,
while a smaller value
shifts to the left and a
larger value shifts to the
right.
–64 to 0* to 63
Reverb Send
(Rev Send)
Specifies how much
reverb is applied to the
selected part.
0 to 40* to 127
Chorus Send
(Cho Send)
Specifies how much
chorus is applied to the
selected part.
0* to 127
Delay Send
(Dly Send)
Specifies how much
delay is applied to the
selected part.
0* to 127
Muting Specific Parts
(Part Mode)
Turning a Part On or Off
To turn each part on or off
Lit
Ke
y
boa rd
CT-X9000_8000IN_EN.book 60 ページ ２０１８年４月１２日 木曜日 午後１時８分