Owner`s manual

Configuration Using a Sound Blaster joystick-MIDI conversion cable
Use a commercially available Sound Blaster joystick-MIDI conversion cable
to connect as shown below.
*1) Computer equipped with a Sound Blaster or compatible sound card with a
joystick port.
*2) Connect the cable's OUT connector to the keyboard's MIDI IN terminal, and
the cable's IN connector to the keyboard's MIDI OUT terminal.
Important! Before connecting your keyboard to your computer, make
sure that the keyboard and computer, as well as all other
peripherals connected to them are turned off.
The location of the joystick port depends on the type of
computer you are using. Check the location of the port on
your computer before connecting the cable. For details, see
the documentation that comes with your computer and sound
card.
Never disconnect the cable while the application is running.