Owner`s manual

(A)
File and Edit menus
(B)
Name, Tempo and Beat settings for the pattern
(C)
Information about the current SMF and Parameter (PRA) Files
(D)
Details of the Split points in the SMF between pattern Elements (See
Making the SMF - How To Use Markers)
(E)
Information about the SMF data
(F)
Tabs to select the Element Editor and OTP editor
Before you load an SMF the lower part of the desktop (SMF Track Info) is
blank, just showing the different pattern parts and their Midi channels. After
loading an SMF the lower part of the desktop will change to show where
data exists on each track. Each bar that contains data is highlighted with a
colored rectangle:
Click on the "Element Editor Tab" and the lower part of the desktop will
change. (See Using the Element Editor). If you click on the different
Elements down the left side (Intro 1, Intro 2, Var 1 etc) you'll see the color of
the different Element buttons change, and the highlight bar over the top of
the Parameters (Tone, Bank, Volume etc) change accordingly. This is to
show you that the Parameters refer to the selected Element. For example, in
the following picture the Parameters are for the Intro 1 Element.