Owner`s manual

The update operation refreshes Parameter Editor window contents so they
correspond to the Keyboard's current setup. After starting up Parameter
Editor, first click the Main window [Update] button so all current Keyboard
parameters are reflected on the Parameter Editor windows.
After that, any time you use Parameter Editor to select a preset tone or
perform other operations, the corresponding setting is updated
automatically. However, Parameter Editor will change parameters
automatically if you use Keyboard operations to change the tone setting or
other parameters on the keyboard, select a registration setup, or use auto
play, auto accompaniment, etc. In this case, you need to update Parameter
Editor accordingly.
Parameter Editor remembers where its windows are located when you exit
it, and positions the windows in the same locations the next time you start it
up. If the Main window is outside of a certain range, however, its position is
initialized the next time you start up Parameter Editor.
If, for some reason, you loose track of the windows you have open, select
[Init location] on the [Window] menu to move all open windows to their initial
default locations on the screen.