Owner`s manual

Power Button
Clicking this button closes the window.
Tone Section
Use this section to select tones. The settings in this section are virtually
identical to the Tone section controls of the Main window. Note that
changing the settings in the Tone section on one window causes the same
settings to be applied on the other window.
Name Box
This box shows the name of the currently
selected tone. You can change the tone
selection by typing in a text string and pressing
the Enter key on your computer's keyboard.
Other Sections
Mod Assign Selection Box
Use this box to configure the Modulation Assign
setting.
Mod Depth Dial
Use this dial to change the Modulation Depth.
Octave Buttons
Use these buttons to select an Octave Shift
setting. The currently selected button appears lit.
Vibrato Parameter Section
Waveform Buttons
Use these settings to select
an LFO waveform. The
currently selected button
appears lit.
Rate Dial
Use this dial to change the
Rate value.