Owner`s manual

Power Button
Clicking this button closes the window.
DSP Type Section
DSP Type Selection Box
Use this box to select the DSP type. Selecting "200 Tone DSP" makes it
possible to directly select the DSP called by the tones.
Name Box
This box shows the name of the currently selected DSP. You can
change the tone selection by typing in a text string and pressing the
Enter key.
Controllers for each parameter are displayed in the panel allocated for each
effect module. The parameters depend on the algorithm, and the name of
each parameter is displayed above its controller. Regardless of the DSP
you select, the same operations are used for similar type controllers.
Using the Parameter Button
A value is displayed in the value box when a
parameter is allocated to a button. Note,
however, that you cannot input values into the
box.
Using the Parameter Dial
A value is displayed in the value box when a
parameter is allocated to a dial. You can
input values into the box.