4} Sonatina CTK’ZOO * Can trot Locations ELECTRONIC MUSICAL INSTRUMENT { Choosing a Power Supply . Installing the batteries . Using AC power Auto power off function Thank you and congratulations on your purchase of the CASIO CT-200. In ruder (o enjoy the features and functions of this unit to their fullest, ! be sure to carefully read this mama and follow the instructions Operation contained herein.
(D Speaker @ POWER/MODE selector (GAMIN VOLUME slider @ACCOMPANY VOLUME slider (& TONE button @RHYTHM button @TONE/RHYTHMW/SONG SELECT buttons (®SONG BANK list @TONES fist @RHYTHMS list button B START/STOP button G@MELODY ON/OFF button @ TEMPO buttons Control Locations < Rear panel » OUTPUTTING jack GB 8V jack
You can power your keyboard with 6 AA batteries, standard AC power (with an optional AC adapter. Installing the batteries This keyboard can be powered by 6 AA size manganese dry cell batteries. Make sure that the POWER/MODE selector is set to the POWER OFF position when installing batteries, 1. Open the battery compartment cover on the bottom of the unit. 2. Load new batteries taking care that the plus and minus poles are facing in the correct directions.
Playing the keyboard TONE button TONE/RHYTHM/SONG SELECT MAIN VOLUBLE staider POWER/MODE selector . Fallow these steps {o play the keyboard, 1. Set the MAIN VOLUME slider to the MIN position. 2. Set the POWER/MODE selector to PLAY. 3. Select a tone (see “Selecting a preset tone”). 4. Play the keyboard, and adjust the MAIN VOLUME slider for the desired volumetric. Selecting a preset tone ng can choose from 100 preset Tories.
Operation RHYTHM button and then enter the two-digit umber of the rhythm by pressing the TONE/ RHYTHM/SONG SELECT button.. To switch off the melody part of an auto-play tune By switching off the melody part of an auto-play dune, you can play the melody part by yourself along with the auto-play accompaniment. Follow the steps below to switch off the melody part of an auto-play tune. 1. Set the POWER/MODE selector to SONG. 2. Press the MELODY ON/OFF button, 3.
Operation Auto-accompaniment This unit features 100 accompaniment patters that let you add full accompaniments 10 your performances automatically. ‘You can select from two types of auto-accompaniment simplified fingering chord play (CASIO CHORD ONj} or standard fingering (FINGERED). NOTE: “The bottom note that you play determines the name of the chord. For example, if the bottom acre is C, e _keyboard plays a C chord. Operation Follow these steps to play the CASIO CHORD auto-accompaniment, .
Operation " M Playing an accompaniment using standard fingering The standard fingering (FINGERED) mode ells you play a wider variety of chords. You can start an accompaniment pattern by pressing down either three or four of the proper accompaniment keys. This unit is capable of recognizing ¥4 different chords. The following shows the fingerings of the recognized chords with a root of C. Note that the fingerings within parentheses can be omitted without changing the sound of the chord produced.
Problem Possible Cause Remedy No sound from the 1. Headphones 1. Unplug headphones, pressed. are not pressed correctly {Fingered chord with less than 3 notes produces no response.} keyboard. connected. 2. Check power supply. 2. Power supply = Are battery poles problem. facing correctly? * Are batteries dead? *is AC adapter connected correctly? No rhythm. AC COMP VOLUME Slide AC COMP VOLUME No accompaniment. | set to MIN. setting toward MAX.
