User Manual

EN-5

General Guide

You can use the [–] (decrease) and [+] (increase) keys to

change the displayed number or value.

• Holding down either key scrolls the displayed setting.

• Pressing both keys at the same time will revert to the initial

default setting or the recommended setting.

Depending on the operation being performed, [2] (o), [3]

(p), [5] (EXIT), and [6] (ENTER) key operations are enabled

while the NUM indicator is not shown on the display.

After configuring function settings with the Function (cs)

button, you can exit the setting screen by long-pressing [5]

(EXIT). For details, see “FUNCTION Button (cs) Functions”

(page EN-40).

In the modes listed below the category (group) of the currently

selected type will be shown on the display. You can change

the category, if you want.

• Tones

• Rhythms

• Songs

• Music Presets

Press bo CATEGORY.

Each press of bo CATEGORY selects the first number

of the next sequential category.

• After pressing bo CATEGORY, you can also scroll

forward and back between category names using the

dk [–] and [+] keys.

• If you do not perform any operation for a while after

displaying a category, the display will automatically

return to the previous screen.

To return to the previous screen, press

cs FUNCTION.

• For information about the categories available in each

mode, refer to the “Category” column of the lists.

• You can directly scroll between top entries of categories by

holding down bo CATEGORY as you use the dk [–] and

[+] keys to scroll.

Perform the following procedure when you want to return the

Digital Keyboard’s stored data and settings to their initial

factory defaults.

See Function No.68 under “FUNCTION Button (cs)

Functions” (page EN-40).

[–] and [+] Keys

[2] (o), [3] (p), [5] (EXIT), and [6] (ENTER)

Keys

[5] (EXIT) Key Long-press