User Manual
Table Of Contents
- Contents
- Establishing a Network Connection Between a Computer and the Projector
- Configuring Projector Network Settings
- Using a Computer to Configure Projector Network Settings
- Preparing for C-Connection
- Network Projecting a Computer Screen Image (Using C-Connection)
- C-Connection Details
- Advanced Operations
- Ports Used for TCP/UDP
13
Important!
Depending on the setup of your web browser, attempting to open the Web Service page may
cause a dialog box warning you about security and privacy issues. Note that there are no
security or privacy issues to worry about, so you can ignore the warning message and open
the projector’s Web Service.
This section explains how to configure detailed projector network settings.
To log into the Projector Setup page
1.
Use the computer to display the projector’s Web Service page (page 12).
2.
On the Web Service page window title bar, click the [Setup] button.
3.
Input the password (Initial Default: admin) into the “Password” box, and then
click the [Login] button.
“admin” will be input automatically as the user name in the “User Name” box. Do not change
it.
If login is successful, the Projector Setup page will appear.
The meanings of the icons that appear at the bottom of this page are described below.
4.
To return to the top menu of the Web Service page, click in the title bar of the
window, and then click the [Home] button.
Projector Setup
Icon and Text Description
SSID of the connected projector.
Clicking this icon displays the Wireless LAN Settings page.
Name and IP address of the connected projector.
Projector network projection status.