User Manual
Table Of Contents
- Contents
- Establishing a Network Connection Between a Computer and the Projector
- Configuring Projector Network Settings
- Using a Computer to Configure Projector Network Settings
- Preparing for C-Connection
- Network Projecting a Computer Screen Image (Using C-Connection)
- C-Connection Details
- Advanced Operations
- Ports Used for TCP/UDP
19
Security Specify the type of encryption used by the external access point being connected with.
Disable (initial default): Select this option when connecting with an external access
point that does not use encryption.
Important!
If you select “WPA/WPA2-EAP” for this setting, be sure also to configure the
settings for each of the “EAP Type” setting items (page 19).
Passphrase/WEP
Key
Input the encryption key (password) of the external access point being connected with
when an option other than “Disable” or “WPA/WPA2-EAP” is selected for the “Security”
setting. However, not supported for a hexadecimal WEP key.
Use this item: To do this:
EAP Type
Configure an authentication setting that is required when “WPA/WPA2-EAP” is selected for the “Security” setting.
EAP Type Select PEAP (initial default setting), TTLS, or TLS as the authentication
protocol for the RADIUS server being connected with.
When “PEAP” or “TTLS” is selected for the “EAP Type” setting:
User Name Input the user name (up to 31 single-byte alphanumeric characters) to use for
authentication.
Password Input the password (up to 64 single-byte alphanumeric characters) to use for
authentication.
When “TLS” is selected for the “EAP Type” setting:
User Name Input a user name for authentication (up to 31 single-byte alphanumeric
characters) when required.
Password Input not required (This projector supports private key without a password
only, so password input is not required.)
Client Certificate Select the client certificate file*
1
to be used for authentication and register it
on the projector.
CA Certificate Select the CA certificate file*
1
to be used for authentication and register it on
the projector.
Private Key Select the private key file*
2
to be used for authentication and register it on the
projector.
*1 File name extension: pem. Format: X.509 v3. Encoding: BASE64 text.
*2 File name extension: key. Format: RSA. Encoding: BASE64. Key length: 2048 bits.
Use this item: To do this:
Client Mode
WEP
WPA-PSK AES
WPA2-PSK AES
WPA-PSK TKIP
WPA2-PSK TKIP
WPA/WPA2-EAP
When connecting with an external access point that is
encrypted, select its encryption type.