User Manual
Table Of Contents
- Contents
- Safety Precautions
- Operating Precautions
- About the Light Source Unit
- Do not block light output or look directly into the lens!
- Laser Precautions (See the label on the projector)
- AC Adapter Precautions
- Battery (Optional YA-B10) Precautions
- Soft Inner Case (Optional YB-3) Precautions
- Other Precautions
- Precautions when Handling the Projector after Use
- Getting Ready
- Operating the Projector
- Cleaning the Projector
- Troubleshooting
- Appendix
- Specifications
49
Bright Mode (Maximum Brightness)
When you want to use the projection light at maximum brightness, use the operation below to change
the Setup Menu “Bright Mode” setting to “On”. Note that “On” can be selected for the “Bright Mode”
only while the projector is being powered by the AC adapter.
1.
Press the [MENU] key to display the Frequent Functions Menu.
2.
Press the [] key, select “Setup Menu”, and then the [ENTER] key.
This displays the Setup Menu.
3.
Use the [] and [] keys to select “Option Settings 1” and then press the
[ENTER] key.
4.
Use the [] and [] keys to select “Bright Mode”.
5.
Use the [] key to select “On”.
You will not be able to change the Light Control setting while “On” is selected for “Bright
Mode”. If you want to change the Light Control setting, you first need to change the “Bright
Mode” setting to “Off”.
6.
After the settings are the way you want, press the [MENU] key.
(Network model only)
You can use the procedure below to adjust the volume level of audio output from the projector’s
speaker.
1.
Press the [MENU] key to display the Frequent Functions Menu.
2.
Use the [] and [] keys to select “Volume Adjustment”.
3.
Use the [] and [] keys to adjust the volume level.
You can adjust the volume level within a range of 0 (muted) to 30 (maximum).
4.
After the settings are the way you want, press the [MENU] key.
Note
The operations below can be performed using the remote controller.
– In place of steps 1 and 2, press the [VOLUME +] or [VOLUME –] key.
This displays the Frequent Functions Menu with “Volume Adjustment” selected.
– In step 3, use the [VOLUME +] and [VOLUME –] keys to adjust the volume level.
Adjusting the Volume Level N