User Manual

11
Warning
*
Avoid Looking into the Light
 Do not look directly into the lens, the
intake or exhaust vents while the light
is on.
The strong light emitted by the light
source creates the risk of eye damage.
Vent Blockage
 Do not allow blocking of the intake or
exhaust vents.
Be sure to observe the precautions
below.
Blocked vents causes internal heat
buildup, which creates the risk of fire
and malfunction.
• Do not locate the projector where ventilation is
poor or in a sealed environment. Do not cover
the projector with cloth or any other material.
• Do not locate the projector where its intake
and/or exhaust vents are directly exposed to
air output from an air conditioner or other
HVAC device.
• Do not use the product while it is on a carpet,
blanket, towel, or other soft material, or on a
seat with soft covering. Use the product on a
hard, flat surface.
For details about the projector’s intake and
exhaust vents, visit the URL below.
https://support.casio.jp/
information.php?cid=007&pid=1419
Keep the Cabinet Closed
 Do not try to open the projector
cabinet.
Doing so creates the risk of electric
shock.
Intake and Exhaust Vents
 Do not touch the intake and exhaust
vents during projection, and do not
place any plastic or other objects or
material close to intake/exhaust vents.
Also, do not place the product on top
of such materials.
Doing so creates the risk of burn injury,
and deformation and discoloration of
the object or material.
Objects Blocking Projection
 Make sure there are no objects that
can block the light in front of the lens
while projecting.
Such conditions create the risk of fire.
Aquarium, Other Water Tank
 Make sure there is no aquarium or any
other type of water tank that can
produce a lens effect in front of the
lens while projecting.
Such conditions create the risk of fire.
Lens
 Do not touch the lens with your hand.
Doing so creates the risk of burn injury
and accident.
-
-
’
-
-
-
-
E