User Manual
Table Of Contents
- Contents
- Safety Precautions
- Operating Precautions
- About the Light Source Unit
- Do not block light output or look directly into the lens!
- Laser Precautions (See the label on the projector)
- AC Adapter Precautions
- Battery (Optional YA-B10) Precautions
- Soft Inner Case (Optional YB-3) Precautions
- Other Precautions
- Precautions when Handling the Projector after Use
- Getting Ready
- Operating the Projector
- Cleaning the Projector
- Troubleshooting
- Appendix
- Specifications
32
Indicator During Power Supply to the Projector
Pressing the battery check button will cause indicator lights to light in accordance with the current
battery level.
Note
Pressing the battery’s check button while the battery is disconnected from both the AC
adapter and the projector will cause indicator lights to light in accordance with the current
battery level. The number of indicator lights that light is the same as those described under
“Indicator During Power Supply to the Projector” above.
You can also check the current battery level by displaying the Frequent Functions Menu in the
projection image. For details, see “Power Source Connection Status and Battery Level” (page
45).
Low Battery Warning
While you are powering the projector using the battery, one of the battery warning icons shown below
will appear in the projection image when the battery level drops below a certain level. The time it takes
until a low battery warning icon appears depends on the projector setup, especially the Light Control
setting (page 48).
Battery level 20% or lower
Battery level 10% or lower
(Orange) (Red)
: Lit : Unlit
100 - 81%
80 - 61%
60 - 41%
40 - 21%
20 - 11%
10% or less