User Manual
Table Of Contents
- Contents
- Safety Precautions
- Operating Precautions
- About the Light Source Unit
- Do not block light output or look directly into the lens!
- Laser Precautions (See the label on the projector)
- AC Adapter Precautions
- Battery (Optional YA-B10) Precautions
- Soft Inner Case (Optional YB-3) Precautions
- Other Precautions
- Precautions when Handling the Projector after Use
- Getting Ready
- Operating the Projector
- Cleaning the Projector
- Troubleshooting
- Appendix
- Specifications
40
(Network model only)
You can use wireless LAN to connect a computer or smart device to the projector. For details about
wireless LAN connection, see the separate “Network Function Guide”.
Connecting the Wireless Adapter
To use the wireless LAN function, you need to connect the wireless adapter (YW-41) that comes with
the projector. For detailed information about installation of the wireless adapter, refer to the
instructions that come with the projector.
(Network model only)
You can connect an audio device or an amp speaker to the projector and output the audio input to the
projector.
Note
Under initial projector default settings, audio is output from the projector’s built-in speaker. To
output audio using another device, connect as shown above and then change the Setup Menu
“Option Settings 2 3 Audio Out” (page 59) setting to “Line”.
Wireless LAN Connection N
Outputting Audio from the Projector to Another Device N
Projector Audio device, amp speaker, etc.
AUDIO OUT terminal
(Stereo mini jack)
To audio input terminal