User Manual
Table Of Contents
- Contents
- Safety Precautions
- Operating Precautions
- About the Light Source Unit
- Do not block light output or look directly into the lens!
- Laser Precautions (See the label on the projector)
- AC Adapter Precautions
- Battery (Optional YA-B10) Precautions
- Soft Inner Case (Optional YB-3) Precautions
- Other Precautions
- Precautions when Handling the Projector after Use
- Getting Ready
- Operating the Projector
- Cleaning the Projector
- Troubleshooting
- Appendix
- Specifications
41
You can update the projector’s firmware (software in the projector’s flash ROM) using a computer
connected to the projector’s LOGO terminal. You can also transfer user logo images from the
computer to the projector.
For information about operations after connection, refer to the documentation below, which is
available from the CASIO website.
Firmware updates : Projector Firmware Update Guide
User logo transfers : User Logo Transfer Guide
LOGO Terminal (Firmware Updates, User Logo Transfers)
Projector Computer
LOGO terminal
(USB Micro B)
To USB port