User Manual
Table Of Contents
- Contents
- Safety Precautions
- Operating Precautions
- About the Light Source Unit
- Do not block light output or look directly into the lens!
- Laser Precautions (See the label on the projector)
- AC Adapter Precautions
- Battery (Optional YA-B10) Precautions
- Soft Inner Case (Optional YB-3) Precautions
- Other Precautions
- Precautions when Handling the Projector after Use
- Getting Ready
- Operating the Projector
- Cleaning the Projector
- Troubleshooting
- Appendix
- Specifications
64
The presentation timer shows the time remaining for a presentation. Under initial default settings, the
presentation timer is displayed discreetly in the lower right corner of the projection screen.
To display the timer function menu
1.
Press the [MENU] key to display the Frequent Functions Menu.
2.
Press the [] key, select “Setup Menu”, and then the [ENTER] key.
This displays the Setup Menu.
3.
Use the [] and [] keys to select “Option Settings 2” and then press the
[ENTER] key.
4.
Use the [] and [] keys to select “Timer Function” and then press the [ENTER]
key.
This displays the Timer Function menu.
5.
To close the Timer Function menu, press the [MENU] key.
Note
You can also use the remote controller function below to display the Timer Function menu.
– When the timer is not displayed on the projected image, press the [TIMER] key twice.
If the timer is displayed, press the [TIMER] key once.
To display the timer (Remote controller operation only)
When the timer is not displayed on the projected image, press the [TIMER] key once.
The timer will appear for about five seconds and then disappear automatically (if “Off” is selected for
the “Continuous Display” setting).
Using the Presentation Timer