User Manual
Table Of Contents
- Contents
- Safety Precautions
- Operating Precautions
- About the Light Source Unit
- Do not block light output or look directly into the lens!
- Laser Precautions (See the label on the projector)
- AC Adapter Precautions
- Battery (Optional YA-B10) Precautions
- Soft Inner Case (Optional YB-3) Precautions
- Other Precautions
- Precautions when Handling the Projector after Use
- Getting Ready
- Operating the Projector
- Cleaning the Projector
- Troubleshooting
- Appendix
- Specifications
74
Each projector is assigned a unique serial number and board (circuit board) number to identify it. You
can find these numbers at the locations shown below.
Serial Number
The serial number is shown on label affixed to the projector.
Board Number
You can use the procedure below to display the Setup Menu “Operational Info”, which shows the
board number.
1.
Display the setup menu (page 50).
2.
Use the [] and [] keys to select “Operational Info”.
Check the “Board Number” line.
3.
Press the [MENU] key to close the setup menu.
Checking the Serial Number and Board Number
CX-OO XXXXXXXXXX-XXXXXX
Production Date: YYYY/MM