User Manual
Table Of Contents
- Contents
- Safety Precautions
- Operating Precautions
- About the Light Source Unit
- Do not block light output or look directly into the lens!
- Laser Precautions (See the label on the projector)
- AC Adapter Precautions
- Battery (Optional YA-B10) Precautions
- Soft Inner Case (Optional YB-3) Precautions
- Other Precautions
- Precautions when Handling the Projector after Use
- Getting Ready
- Operating the Projector
- Cleaning the Projector
- Troubleshooting
- Appendix
- Specifications
81
The above “Required Charging Time” is the approximate time it takes to achieve a full charge
(100%) after connecting the AC adapter to a fully discharged (0%) battery, which is not connected
to the projector. Actual charging time may differ depending on ambient temperature and other
environmental factors, and on the usage condition of the battery.
Battery Specifications (Optional YA-B10)
Rechargeable Power Supply AC adapter (100 to 240VN(AC), 50/60Hz)
Input 19V=(DC) 7.9A
Output 14.4V=(DC) 86.4W
Capacity 6600mAh (95Wh)
Required Charging Time Approximately 4 hours
Approximate Dimensions 212 (W) × 106 (D) × 23 (H) mm (8.3" × 4.2" × 0.9")
(excluding projections)
Approximate Weight 640g (1.4lbs)
Operating Temperature 5 to 35°C (41 to 95°F)
Operating Humidity 20 to 80% (non-condensation)
Operating Altitude 0 to 3,000 meters (0 to 10,000 feet) above sea level
Soft Inner Case Specifications (Optional YB-3)
Approximate Dimensions 290 (W) ×230 (D) × 80 (H) mm (11.4" × 9.1" × 3.1")
(Can vary depending on how the projector is packed.)
Approximate Weight 185g (0.4 lbs)
Material (Fabric) Outer: Polyester
Inner: Polyester
B