User manual - DT-810M60E

E-15

General Guide

• Left side

• Front

• Right side

• Back

1 Reader port Emits a laser for bar code reading.

2 Read indicator Indicates the status of the read operation: green for a successful read, red

when the read is no good.

3 LCD screen and touch panel Displays various data when a program is being run (LCD screen). Areas on

the screen can touched with the finger or supplied stylus to perform various

key operations (touch panel). Pressing a key inputs the alpha character or

punctuation marked on it.

4 Stroke keys A total of 28 keys are provided to turn power on and off, to trigger bar code

reading, and for other operations.

5 RS-232C connector (inside cap) Allows connection of other devices for system expansion.

6 Reset button (inside cap) Use a paper clip or other thin object to press the RESET button located

inside the hole.

7 Wrist strap hook Hook for installing the wrist strap.

8 Laser warning label Class 1 laser warning label.

9 Speaker Outputs operation confirmation tones. Take care to avoid blocking the

speaker holes and reducing output sound volume. Never insert any thin,

pointed object into the speaker holes. Doing so can cause malfunction.

10 Back-up battery compartment Holds memory backup lithium battery.

11 Main battery compartment Holds main batteries.

12 Main battery compartment lock Locks main battery compartment cover in place. Data Collector power does

not turn on if the battery compartment cover lock is not in the LOCK

position.

13 Charger/AC terminal This terminal receives power when the Data Collector is attached to an

optional Optical Communication Unit.

14 Infrared port This port is for contact-less infrared data communication with another

DT-810/DT-800 unit or an optional Optical Communication Unit.

15 Touch panel stylus Use this stylus for touch panel key input.

• Bottom