E Handheld Terminal R-50C/R-50 User’s Guide Be sure to read “Safety Precautions” inside this guide before trying to use your Handheld Terminal.
x This Product is equipped with the Brycen BL-RAPPORE Stack and My Wirefree Network Bluetooth User Interface Application, the use of which is governed by a license granted by Brycen Co., Ltd. x BLUETOOTH is a registered trademark owned by Bluetooth SIG, Inc. and licensed to CASIO COMPUTER CO., LTD. x Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Contents Safety Precautions ........................................................................................E-3 Operating Precautions ..................................................................................E-8 Important ........................................................................................................E-8 After Service ........................................................................................................ E-8 Regulatory Information ....................
Using the Ethernet Cradle (HA-G62IO) ......................................................E-40 General Guide ................................................................................................... E-40 Specifications ..................................................................................................... E-42 Using the Cradle-type Battery Charger (HA-G30CHG) ............................E-43 General Guide ..............................................................................
Safety Precautions Congratulations upon your selection of this CASIO product. Be sure to read the following Safety Precautions before trying to use it for the first time. Your neglect or avoidance of the warning and caution statements in the subsequent pages causes the danger of fire, electric shock, malfunction and damage on the goods as well as personal injury. Markings and Symbols The following are the meanings of the markings and symbols used in these Safety Precautions.
Warning Dust and Moisture x Though the Handheld Terminal is dust and water splash resistant, its options including the battery pack are not. Keep loose metal objects and containers filled with liquid away from your Handheld Terminal and the options. Also, never handle the Handheld Terminal and the options while your hands are wet. Laser Light x This product with the integrated laser scanning module scans bar codes using laser light.
Warning Avoiding Traffic Accidents x Never use your Car Mounted-type Battery Charger while operating a motor vehicle. Park your vehicle in a safe place before performing any operation. x Never locate the Car Mounted-type Battery Charger where it might interfere with proper operation of the vehicle. x Locate connecting cables as instructed by the manual, avoiding locations that can interfere with driving operations.
Optional Lithium-ion Battery Pack Danger x Never use the Handheld Terminal and its option including the battery pack and battery next to open flame, near a stove, or any other area exposed to high heat, or leave them for a long period of time in a vehicle parked in direct sunlight. x Never use the battery pack with any device other than the Handheld Terminal. x Never dispose of the battery pack by incinerating it or otherwise expose it to heat.
Power Supply / AC Adaptor Warning x Do not use the Handheld Terminal at a voltage other than the specified voltage. Also, do not connect the Handheld Terminal to a multi-plug power strip. x Never modify, sharply bend, twist, or pull on the power cord. x Never use a detergent to clean AC adaptor and its power cable, especially on the plug and the jack. x When using the battery chargers and the cradles, be sure to use the respective AC adaptors. Caution x Never pull on the power cord when unplugging it.
Operating Precautions Your Handheld Terminal and its options are precision. Improper operation or rough handling can cause problems with data storage and other problems. Note and observe the following precautions to ensure proper operation. x Do not leave dead battery pack in the Handheld Terminal for a long period. Dead battery pack can leak, leading to malfunction and damage to the Handheld Terminal.
Regulatory Information DECLARATION OF CONFORMITY We, the under signed, CASIO Europe GmbH, hereby declare that the following equipment: Product: Handheld Terminal Models: DT-X30R Brand: CASIO are in conformity with all the provisions of the following EC directive with meeting the related test standards: Council Directive: 1999/5/EC (R&TTE Directive): Standards for all models: EN 60950-1: 2001 EN 50371: 2002 EN 301 489-17 v1.2.1 (2002-08) EN 300 328 v1.7.
0984 Products are for distribution within all member states of the EU. France limited to 2446.5-2483.5 MHz Indoor use. Belgium limited to 2400-2483.5 MHz Indoor, 2460-2483.5 MHz Outdoor use. The information described above dates from January 2008 and may be subjected to future changes. Optional models HA-G60IO, HA-G62IO, HA-G30CHG, HA-G32DCHG and HA-G21BAT are in conformity with the Council Directive 2004/108/EC. Manufacturer: CASIO COMPUTER CO., LTD.
ENGLISH Deutsch Français Disposal of Waste Electrical & Electronic Equipment of products for Household use (Applicable in the European Union only) The symbol (crossed out wheeled-bin) on your product indicates that the product shall not be mixed or disposed with your household waste, at their end of use. This product shall be handed over to your local community waste collection point for the recycling of the product.
Svenska Bortskaffning av förbrukade elektriska & elektroniska produkter för hushållsbruk (Gäller enbart i den Europeiska Unionen) Denna symbol (en överkorsad soptunna) på produkten innebär att produkten ej ska blandas eller slängas med ditt hushållsavfall när den är förbrukad. Produkten ska lämnas till en lokal insamlingsplats för denna slags produkter för återvinning. Kontakta kommunkontoret för närmare detaljer om var du finner sådana insamlingsplatser.
Suomi Sähkö- ja elektroniikkatuotteiden hävitysohjeet kotitalouksia varten (Vain Euroopan Unionia varten) Tuotteeseen merkitty symboli (ylitse ruksattu jätesäiliö) osoittaa, että tuotetta ei saa sekoittaa eikä hävittää talousjätteiden kanssa. Tuote on luovutettava sopivaan tällaisten laitteiden kierrätyksestä huolehtivaan keräyspisteeseen. Pyydä lisätietoja jäteasioista vastaavilta paikallisilta viranomaisilta.
E-14
Handheld Terminal System Configuration Bundled Items Please check the contents in the box before using the Handheld Terminal for the first time. DT-X30 Series Handheld Terminal Hand Belt Stylus The stylus is attached to the Handheld Terminal. User's Guide Options USB Cradle The illustration shows the USB Cradle(HA-G60IO).
Options Battery Pack HA-G20BAT (Battery Pack) Soft Case Dual Battery Charger HA-G32DCHG AC Adaptor for USB Cradle/Ethernet Cradle/ Dual Battery Charger AD-S42120B-N Power Cord for Europe AC-CORD-EU Power Cord for North America AC-CORD-US Power Cord for Taiwan AC-CORD-TW Power Cord for Korea AC-CORD-KR Power Cord for Australia AC-CORD-AU Screen Protect Sheet HA-G90PS5 Cable E-16 DT-380USB
General Guide TOP 18 Left 19 Front 1 Right Back 23 19 18 20 21 22 4 14 15 5 6 8 10 7 9 13 14 16 23 14 24 24 17 25 11 12 26 26 14 Bottom Battery compartment 28 27 1 Speaker Generates audio and buzzer tones. 2 Indicator 1 Orange: Charging Green: Charging complete Red: Battery pack error or the surrounding temperature is out of the charging temperature range. 3 Indicator 2 Flashes blue when operating via Bluetooth or orange when operating via W-LAN.
4 Screen Displays text and operating instructions. In addition, operations can be performed and data can be input using the stylus provided. 5 Microphone Used for audio input (including voice). 6 Power Key Turns the power on and off. 7 CLR Key Used to clear one letter to the left of the cursor. 8 Center Trigger Key Used to perform bar code reading. Can be assigned an arbitrary function. 9 Enter Key Press when finishing entering numerical values or when moving to the next step.
25 Battery Pack Cover Used to cover the battery compartment that holds the battery pack inside. 26 Strap Holes Used to attach the hand strap. 27 Power Contacts Used to receive power provided by the USB Cradle or Ethernet Cradle. Also used for data communication. 28 microSD Card Slot microSD card slot. (Remove the battery pack to load a card.
Loading and Removing the Battery Pack Your Handheld Terminal uses two types of battery: a battery pack and a memory backup battery. The battery pack is used to power normal operations and to store data, while the memory backup battery (built-in) provides the power required to maintain memory contents when the battery pack power is unable to supply power for some reason. When the battery pack power goes low, immediately charge it or replace it with a charged battery pack.
Loading 1. Turn over the Handheld Terminal. 2. Remove the battery pack cover as follows: Slide the left and right lock switches for the battery pack cover to the “FREE” position. Hook your fingertips into the notches in the Handheld Terminal and lift the battery pack cover up in the direction indicated by the arrow. Notch Notch 3. Load a battery pack (HA-G20BAT). Take care that the battery pack is oriented correctly when you load it.
Removing 1. Make sure that the Handheld Terminal is turned off. If the power is on, press the power key to turn it off. 2. Turn over the Handheld Terminal. 3. Refer to “Loading” on the previous page and remove the battery pack cover. 4. Remove the battery pack by pulling up the removal tape as shown in the illustration. Important! x Before starting to use the Handheld Terminal, ensure that the battery pack cover is properly closed.
Charging the Battery Pack To charge the battery pack, use one of the cradles and the battery chargers following the procedure described below. Be sure to use the separately sold AC adaptor (ADS42120B-N) to power the cradle or charger. Or, if you use the Car Mounted-type Battery Charger in a vehicle, use the accompanied Car Power Cable to power the charger.
Red Flashing: Battery pack problem Green: Charging complete Green Flashing: Standby due to the surrounding temperature being beyond the specified temperature range (Approximately 0°- 40°C) (charging resumes when the temperature reaches the range.) Car Mounted-type Battery Charger Plug in the Car Power Cable accompanied in the box to the Car Mounted-type Battery Charger as illustrated below and the other end to the cigarette lighter socket in vehicle.
Attaching the Hand Belt The hand belt can be used to prevent the Handheld Terminal from fall when carrying it around. Attach the hand belt according to the procedure described below. To attach the hand belt 1. Thread the belt through the hand belt hole as shown in the figure. Then fold it back and secure using the hook-loop fastener. 2. Thread the other end of the belt through the hand belt hole and adjust the length so that it fits comfortably on your hand. Then secure using the hook-loop fastener.
Configuring Handheld Terminal Settings Calibrating Touch Screen Alignment Whenever the response of the touch screen is poor, or the operations being executed do not match with the location you are tapping on the touch screen, please recalibrate the alignment of the touch screen using the following method. x Press the “Fn” key and then press the “4” key after confirming that “F” is displayed in the lower right corner of the screen. The following screen is displayed.
Using the CMOS Imager 1. Turn on the Handheld Terminal, position its CMOS Imager reader port near the bar code or 2D code, and then press the Trigger Key. The aimer in a round shape is emitted onto barcode. 2. The Handheld Terminal reads the code by emitting laser and red lights. Indicator 2 (read operation indicator lamp) lights in green when the reading is successful. Bar code and stacked 2D code Reading Guide When you press the Trigger key, LEDs in the Handheld Terminal emit laser and red lights.
Warning Label Laser Beam x This label is a warning and caution label for Class 2 laser products that comply with IEC60825-1:2007. x Although Class 2 laser light is only emitted momentarily, never look directly into the beam light. x The laser light emitted by this laser scanner has a maximum output of less than 1 mW and a wavelength of 650 nm. x Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
Performing Communications IR Communication IR communication can be used to transfer data between two Handheld Terminals. When performing IR communication, orient the IR ports of both Handheld Terminals so they are pointing directly at each other. The ports can be in direct contact with each other, or they can be separated by up to 30cm (11 e ") (up to 20cm (7 7e8") for communication between units). Important! x A high-sensitivity communication element is used during IR communication.
Bluetooth® Communication Bluetooth® interface can also be used to transfer data between two Handheld Terminals. With Bluetooth® the two Handheld Terminals should be located within about three meters (9'10 e ") from each other, as long as there is nothing blocking the path between them. Important! Observe the following precautions to help ensure that Bluetooth communication is successful. x Make sure two Handheld Terminals face each other within three meters (9'10 e ").
Handling microSD Cards The Handheld Terminal supports microSD card. Since the microSD card slot is located inside the battery pack compartment, first remove the battery pack when installing or removing a microSD card. Refer to pages 20 to 22 for information on “Loading and Removing the battery pack”. Install (or replace) a microSD card according to the procedure described below. Installing 1. Check that the power is turned off. If the power is on, always make sure to turn it off by pressing the Power Key.
Removing 1. Check that the power is turned off. If the power is on, always make sure to turn it off by pressing the Power Key. 2. Remove the battery pack. 3. Push in the card. Slowly remove the card after it slightly pops out. Press 4. Load the battery pack. Important! x A microSD card must be inserted with the top and bottom properly aligned and in the proper direction. Attempting to insert it with an excessive force in the incorrect orientation can risk damage to the connectors and slot.
Resetting the Handheld Terminal Resetting the Handheld Terminal is the same as resetting a PC. Performing a reset causes all unsaved inputs and edits to be lost, but data that is already stored in the memory as well as all settings should be unaffected. Use reset to restore normal operation whenever the Handheld Terminal operates abnormally due to misoperation or some other reason. Use a stylus to press the reset switch on the back of the DT-X30. This starts the reset operation.
DT-X30 Specifications Model: CPU: Memory: OS: Display: CMOS Imager: DT-X30R-50C/R-50 Marvell® PXA320 624MHz 128MB RAM, 128MB Flash ROM (user defined: 80MB) Microsoft® Windows® CE6.0R2 operating system, English Version 3.
Battery Life: Battery pack: Approximately 18 hours* Approximately 10 hours** * under the conditions that CPU speed is set to the auto power save mode, backlight is set to off, and the ratio of cyclic operation of “Standby, Key input, and Scanning” is set at 20:1:1. ** under the conditions that CPU speed is set to the auto power save mode, backlight is set to off, and the ratio of cyclic operation of “Standby, Scanning, and WLAN” is set at 6.5:1.5:2.
Dimensional Drawing Approx. 49 mm (115/16") Approx. 242 mm (91/2") Approx. 87 mm (37/16") Approx. 59 mm (25/16") E-36 Approx.
Using the USB Cradle (HA-G60IO) The optionally available USB Cradle (HA-G60IO) makes it possible to transmit system data and file data between the Handheld Terminal and a PC via a USB connection (download or upload). You can also use the USB Cradle to charge the battery pack installed in the Handheld Terminal.
1 USB Client Port This port is used to transmit system data and file data (download, upload) by connecting the Cradle to a PC using a USB cable (DT-380USB). A dedicated driver must be installed in the PC before connecting the Cradle to the PC. 2 USB Host Port This port is used to connect a corresponding USB peripheral device. 3 Selector Switch This switch is used to switch between the USB host port and USB client port.
Specifications 1. USB Protocol: Transfer Rate: 2. Charging Charging Method: Charge Period: 3. Power Supply Power Source: Consumption Current: Output to Handheld Terminal: USB Host Output: 4. AC Adaptor Model: Input: Output: 5. Dimensions and Weight Dimensions: Weight: 6. Operating Environment Temperature: Humidity: USB Ver1.1 Standard 12Mbps (max.) Constant current/voltage Approximately 5 hours AC adaptor (AD-S42120B) 12V DC approximately 3.0A 9.5V DC 2.7A (max.) 5V DC 0.5A (max.
Using the Ethernet Cradle (HA-G62IO) The optionally available Enthernet Cradle (HA-G62IO) makes it possible to transmit system data and file data between the Handheld Terminal and a PC via a USB or LAN connection (download or upload). You can also use the Ethernet Cradle to charge the battery pack installed in the Handheld Terminal.
1 USB Client Port This port is used to transmit system data and file data (download, upload) by connecting the Ethernet Cradle to a PC using a USB cable (DT-380USB). The dedicated driver must be installed in the PC before connecting the Ethernet Cradle to the PC. 2 USB Host Port This port is used to connect a corresponding USB peripheral device. 3 LAN Connection Status LED This LED shows the status of the LAN connection. Off: LAN cable not connected correctly.
x Do not subject the Handheld Terminal and Ethernet Cradle to vibration or impact during communication. This can cause communication to be interrupted. x When placing the DT-X30 into the cradle, make sure that it is seated properly and that the power LED at the front of the Ethernet Cradle is lit in green. Charging and communication will not proceed properly if the Handheld Terminal is not seated properly. x Always cap ports that are not being used.
Using the Cradle-type Battery Charger (HA-G30CHG) The optionally available Cradle-type Battery Charger (HA-G30CHG) lets you charge the Handheld Terminal’s battery simply by placing the Handheld Terminal onto the charger. General Guide Top 2 Front 3 4 Back 1 1 AC Adaptor Jack Connect the AC adaptor (sold separately) here. 2 Terminal Detect Switch This switch detects when the DT-X30 is mounted correctly on the charger. 3 Power Contacts Power is supplied to the DT-X30 via these contacts.
Important ! x Never short out the power contacts of the Cradle-type Battery Charger. This can damage the Cradle-type Battery Charger. x Allowing the power contacts become wet can cause an electric shock or fire. In addition, if the contacts become soiled, contact may be impaired resulting in poor charging. For reasons of safety and maintaining charging battery pack(s) in optimum condition, clean the power contacts by wiping with a dry cloth or cotton swab after disconnecting the AC adaptor.
Using the Car Mounted-type Battery Charger (HA-G35CHG) The optionally available Car Mounted-type Battery Charger (HA-G35CHG) can be used to charge the battery installed in the Handheld Terminal using power from the cigarette lighter in your car. General Guide Top 4 Left Front 2 2 Back 2 3 2 1 5 1 AC Adaptor Jack Connect the Car Power Cable (bundled) here. 2 Removal Buttons Press when removing the DT-X30.
Important! x Take care to avoid allowing the power contacts to become connected to each other, which creates a short. x Regarding the installation of HA-G35CHG in your car, no technical advice is available from CASIO. Consult with automotive parts store or specialized store regarding the installation method and mounting strength of the products installed in your car. Precaution x The Car Power Cable cigarette lighter plug may not fit the cigarette lighter sockets of certain 12/24V DC vehicles.
Using the Dual Battery Charger (HA-G32DCHG) The optionally available Dual Battery Charger (HA-G32DCHG) can be used to simultaneously charge two battery packs.
1 Charge Indicator LED This LED indicates the charge status of the battery pack(s). Off: Not charging Red: Charging Red Flashing: Battery pack problem Green Flashing: Standby Green: Charging complete 2 Power Contacts Power is supplied to the Handheld Terminal via these contacts. 3 AC Adaptor Jack This is used to supply power by connecting the AC adaptor (sold separately). 4 Dual Battery Charger Connection Port Use this port to connect multiple Dual Battery Chargers to each other.
Connecting Multiple Dual Battery Chargers You can connect up to three Dual Battery Chargers. Doing so makes it possible to supply power to all the Dual Battery Chargers using one dedicated AC adaptor. 1. As shown in the illustrations below, remove the connector covers of the Dual Battery Chargers you want to connect to each other. Connector cover 2. Connect the two Dual Battery Chargers as shown below. 3.
Specifications 1. Charging Specification Charging Method: Charge Period: Constant current/voltage Approx. 4 hours (1 standard battery pack, normal temperature) When charging two battery packs: Approx. 5.5 hours (2 standard battery packs, normal temperature) 2. Power Supply Power Source: Consumption Current: Output: AC adaptor (AD-S42120B*) 12V DC 3.5A 8.2V DC 1.0A (max.) 3. AC Adaptor Model: Input: Output: AD-S42120B 100V to 240V AC 50/60Hz 1.2A 12V DC 3.5A 4.
Using Rechargeable Battery Pack HA-G20BAT Important! x Store a battery pack in its special soft case whenever you are not using it. x If the battery pack has been left over unused for a long period of time, the capacity remained decreases due to spontaneous discharge or chemical decomposition by the battery pack itself. If the battery pack fails to hold its operating duration after it has been fully charged, replace it with a new one. The battery pack may reach the end of its service life.
CASIO COMPUTER CO., LTD.
