Hardware manual

16
Table 1.5
No. Name Description
1 USB Client Port This port is used to transmit data (download, upload) by connecting the
Ethernet Cradle to PC using USB cable (DT-380USB). The dedicated driver
must be installed in the PC before connecting the cradle to the PC.
2 USB Host Port This port is used to connect a USB peripheral device.
This LED shows the LAN connection status.
Off : LAN cable not connected correctly.
3 LAN
Connection
Status LED
On in Green : LAN cable connected correctly.
4 LAN Port This port is used for connecting the cradle to PC or hub via LAN cable so
that data can be transmitted (uploaded or downloaded). The special driver
must be installed in the terminal.
This LED shows the LAN operation status.
Off : No communication.
5 LAN
Communication
Status LED
Flashing : Communication in progress.
6 Selector Switch This switch is used to switch between USB connection and LAN connection.
7 AC Adaptor
Jack
Connect the dedicated AC adaptor, AD-S42120B, here.
8 Terminal Detect
Switch
This switch detects when the terminal is mounted correctly on the cradle.
9 Ethernet Cradle
Contacts
Power is supplied to the terminal via these contacts.
This LED indicates the power status and the mounting status of the terminal.
Off : The terminal is not mounted. Or, the AC adaptor is not
connected.
10 Power LED
Flashing Green : Power is turned on, and the terminal is correctly set in
the cradle.