Hardware manual

25
CMOS Imager (DT-X30R-30, R-30-CN, GR-30, GR-30-CN, GR-30C, GR-30C-CN, R-35, G-35U,
G-35UC, GR-35, GR-35C)
Method C-MOS Imager, 752 x 480 (Wide VGA),
monochrome
Aimer method Laser 650+10nm or -5nm <1 mW
Laser emit angle Redirected downward at 37 degree
Resolution 1D
Stacked 2D
Matrix 2D
: 0.15mm
: 0.169mm
: 0.339mm
PCS 0.45 (minimum)
Readable distance
(Resolution = 1.0mm)
1D
Stacked 2D
Matrix 2D
: Approx. 40 to 410 mm
: Approx. 50 to 250 mm
: Approx. 60 to 150 mm
Max. 29 mm
- At readable distance 40
mm
Readable width
Max. 265 mm
- At readable distance
365 mm
Focal distance 4.5 inches
Daylight for scanning 50,000 Lux or less
Readable 1D
symbologies
UPC-A, UPC-E, EAN8, EAN13, Codabar
(NW-7), Code39, MSI, Interleaved 2of5
(ITF), Code93, Code128 (EAN128),
Code11, IATA, RSS-14 (GS1 DataBar
Omnidirectional), RSS Limited, (GS1
DataBar Limited), RSS Expanded, (GS1
DataBar Expanded)
Readable Stacked 2D
symbologies
PDF417, Micro PDF, Code49, TLC39,
Composite, Codablock F, RSS-14 Stacked
(GS1 DataBar Omnidirectionalstacked),
RSS Expanded Stacked (GS1 DataBar
Expanded Stacked), RSS-14 Stacked (GS1
DataBar Stacked), RSS Expanded Stacked
(GS1 DataBar Expanded Stacked)
Readable Matrix 2D
symbologies
Aztec, DataMatrix, Maxicode, QR Code
Display
Display device 3.5-inch Advanced 2-way TFT LCD
No. of dots 240 (horizontal) x 320 (vertical) See note 2.
Dot pitch 0.153 (horizontal) x 0.153 (vertical) mm
Gradation 65,536 colors
Display font Scalable font
Backlight LED backlight
Viewing angle 50 degree or more (Up, Down, Left, Right)
Continue.