Hardware manual

When power supply is made via

cradle

Ye s

When power supply is made by

installed battery pack (when

terminal’s power on )

Ye s

Method to charge

memory backup

battery

When power supply is made by

installed battery pack (when

terminal’s power off)

Ye s

Notes:

1. The microphone is not integrated in DT-X30R-30-CN, DT-X30GR-30-CN and

DT-X30GR-30C-CN to comply with the relevant radio regulations of China.

2. Dead Pixels

The LCD panel employed in this product uses high precision and substantial number of

components which commonly cause a small number of the pixels not to light or to remain lit all

the time. This is due to the characteristics of LCD panel yield in accuracy over 99.99% and

permissible.

Table 2.2

Pin no. Signal Description Direction

1 V CRADLE Power supply/Charge to the terminal -

2 D + USB D+ IN / OUT

3 D - USB D- IN / OUT

4 USB_ID Switch-over between USB host and USB client IN

5 V BUS Power from USB cradle OUT IN / OUT

6 GND GND -