Specifications

1.7 Operation mode

If the user directly operate the terminal, application on the terminal should be limited the

operation. The operation mode is meant to be used in this situation.Operation mode setting is

basically easy, but difficult to user.

Initial State

Configuration Switch is on the behind of the battery cover.

The upper side means ON, and the lower side means OFF.

Figure 1-4

Initial state of configuration switches are set as below.

Table 1.9

No. Initial switch state Remarks

1 ON

2 ON

3 ON

4 ON

5 ON

6 OFF

7 OFF Operation mode switch

8 OFF

User can change No.7 switch only, otherwise the terminal will not boot.

Operation mode switch

Users can change the operation mode by switch No.7.

Table 1.10

State of switch No.7 Operation mode

ON Customer mode

OFF Normal mode

Changing the operation mode can also change the mode of Job Menu.

See Job Menu for its details.

OFF