Specifications

156
2) Operating environment check
At the time of mode selection, the software checks the remaining battery power and Wi-Fi
Direct status. If either is inappropriate, the software displays a warning dialog as described
below.
[If the remaining battery power is lower than 30%]
The following dialog appears after a long vibration:
Figure 6.12
Table 6.3
Item Operation
No Closes the dialog and returns to the main screen.
Yes Proceeds to the next screen and continues processing.
[If Wi-Fi Direct is disabled]
The state value of Wi-Fi, and the operation of either of the following 1 or 2.
1. If Wi-Fi is not enable, Wi-Fi Direct will be enable automatically. The following dialog
appears after a long vibration, and wait Wi-Fi Direct to be enable. When Wi-Fi Direct will
be enable, the dialog is closed automatically. Select “Receiver mode” to continue process
again.
Figure 6.13
2. If Wi-Fi is enable, an operation to enable Wi-Fi Direct on setting screen. The following
dialog appears after a long vibration:
Figure 6.14
Table 6.4
Item Operation
No Closes the dialog and returns to the main screen.
Yes Enters the Wi-Fi Direct settings screen.
The main screen reappears when you select the back key on the settings screen.